Pendant lamps in the bedroom interior: 75 photos for all styles + how to choose the right one

This technique is quite popular for the kitchen or dining room, when pendant lamps on long cords illuminate the dining table. And using paired pendant lamps in a bedroom interior is a spectacular move that is actively used by decorators, and apartment owners are sometimes unaware of the rich potential of this type of lighting.

Pendant lamps have a lot of advantages and many variations in style - due to the fact that the type and size of the lampshade is limited only by your imagination, and in lighting salons there is a model for every taste and budget.

Do you want to understand this issue in more detail? Would you like to know when pendant lamps are the ideal solution for the bedroom? How to emphasize the style of a room with the right model?

Everything you wanted to know on this topic is in our new guide + 75 photos of paired pendant lamps in bedroom interiors .

__________________________

Zoning lighting in the bedroom

To highlight zones, it is necessary to combine general (diffuse) and local (directional) lighting.

Central zone. The bedroom needs soft and diffused light, intended for general illumination at night. Typically a chandelier or ceiling lamp is used as a source. The location is the geometric center of the room. It is also often placed in the center of the space above the bed.

A chandelier with exposed light sources (lamps) and lots of reflective elements (such as crystal pendants or mirror elements) can only irritate the eyes. It is better to opt for a model with fabric lampshades. In small bedrooms you should not use large chandeliers; it is better to give preference to overhead lamps with a small height.

Bedside area. Bedside light - local lighting. Its task is to comfortably read or work on a laptop in the dark. Lamps in this zone not only perform functional tasks, they are usually important decorative elements.

Such lamps include table lamps on bedside tables, some pendant lamps, and wall lamps (sconces). Sometimes there are options for the headboard of the bed with built-in lighting. It is worth taking care of the possibility of directing the light and adjusting the brightness in order not to disturb the sleeping partner.

Workplace. Many modern bedrooms have a desk area. A table lamp would be the best option here.

Tolomeo from the Artemide factory

If there is only a reading chair in this area, then it is best to use a floor lamp or a lamp with a flexible leg.

Mirror. The bedroom may have a dressing table, which also needs proper lighting. Designers recommend using the following combination of devices: a central diffuser above the mirror plus a lamp on each side.

Various interior elements require separate lighting: wardrobes, ceiling contours, niches, podiums, paintings, sculptures. Suspended ceilings open up the greatest possibilities for the designer’s imagination.

Lighting design is not just harmoniously selected and beautiful lamps, but a whole area of ​​design where they study the interaction of light and space, the impact of color and light on a person’s psychological and physical state, his mood and emotions. The issue of rest needs the right approach. Knowing the basics of organizing lighting in the bedroom, you can easily formulate your task to specialists in the lighting salon.

color of pendant lamps for the bedroom and a spectacular background for them:

Thanks to some decorative tricks, pendant lamps on cords will look as impressive as possible, and the bedroom interior will only benefit.

lamps as color accents:

If you like spot accents, pendant lights will do the job perfectly. If you want to maintain the bright shade of a beautiful bedspread, decorative pillows or headboard, choose the same move. And even white lamps will fulfill this role if there is very little snow-white in the bedroom.

against the background of a colored wall:

Pendant lamps in neutral tones are especially good for these purposes. They can stand out in contrast or be an elegant complement to the shade of the wall behind the head of the bed.

against a background of spectacular texture:

The main goal is to draw attention to the beautiful and original finish of the accent wall behind the headboard, illuminating it much better than any other light, with the exception of a directional spotlight. The texture will look more voluminous, and the smoothness of the lampshade will add contrast when repeating the wall shade

metallic lampshades:

An interesting move used for modern and vintage interiors. The only rule is that the choice of such a lampshade is justified; in terms of shade (or type of metal), it must match other “shiny” elements of the bedroom. Here are several harmonious examples.

__________________________

Lamp options

Lamps for lighting fixtures are selected depending on the intended use. Properly selected light helps to optimize the lighting of a room, improve its interior, without increasing energy consumption.

Today there are several types of lamps, differing in the nature of light, technical features and use cases.

Incandescent lamps

Incandescent lamps are the oldest light sources. They are a glass flask of different shapes with an incandescent element inside. Light is produced by heating a metal filament under the influence of an electric current. Incandescent lamps are affordable, do not require regulating devices, are not sensitive to power outages and are not toxic to humans.

Luminescent

Lamps of this type contain mercury vapor, which produces ultraviolet radiation under the influence of an electrical discharge. Such light sources are quite common, have a wide spectrum, power and the ability to connect without starting devices.

They have one significant drawback - the toxicity of the filler. Requires proper disposal after expiration date.

LEDs

Lighting sources appeared relatively recently, but have proven themselves to be the best. LED lamps are safe and do not emit harmful fumes. They reduce energy costs by more than 2 times, while distributing uniform illumination without spots or streaks.

Energy saving

They outperform an incandescent lamp in terms of light output by 5 times, which significantly saves energy in the house. They have different sizes and shapes and fit a standard base. The advantage of an energy-saving lamp is its service life. The device does not contain a tungsten filament that can burn out. The glow occurs due to the ionization of gas ions that fill the flask by current.

Neon

Neon lamps are quite durable. They give good, bright light without heating up. Can be of any shape. They are silent in operation and have the ability to control brightness. They have disadvantages - high cost, fragility and toxicity.

Types of hanging beds

There are several options for fixing structures on a suspension:

• Wall. Due to the fact that this floating model has a hidden fastening, it is possible to create a certain effect of levitation in the air, which looks truly mesmerizing.
• Ceiling. The most commonly used type of fastening, reminiscent of a garden swing. Anchor loops are mounted directly into the ceiling or into beams if placement is intended in the attic.
• Combined. It is the most reliable and safe type of fixation, which, thanks to both ceiling and wall fastening, ensures maximum structural strength.

The photo shows the bedroom interior and a hanging bed with a combined type of fastening.

When choosing a fastener, the static and dynamic load of the suspended product is taken into account; for example, for installing children's beds, the most suitable option would be a combined type of fixation, when one side of the bed frame is adjacent to the wall, and the other is attached with holders to the ceiling.

Proper organization of lighting in the room

Once you have renovated your room and arranged everything to your liking, you can now think about the lighting.

The bedroom is a place where the owners of the house can rest and relax, so it is very important to do everything possible so that the lighting can be gentle and conducive to relaxation, and bright at the right moments. When organizing light using a sconce above the bed, as in the photo, it is important to think through everything in advance

When organizing light using a sconce above the bed, as in the photo, it is important to think through everything in advance

Lighting should not visually focus attention on the shortcomings of the room - on the contrary, its task is different: to emphasize the advantages.

If your room is small, you should make sure that the wallpaper has a glossy surface: this decorative technique is necessary so that light is reflected from the surface of the walls and creates the impression of a more spacious room.

A sconce is perfect as a source of additional light, but no matter what room you decide to hang it in: large or small, it is important that you install it correctly. A photo of the successful placement of the lamp can be seen below.

Important! For those who are the lucky owners of high ceilings, the height of the sconce above the bed is not as important as for those who live in a Khrushchev-era apartment or a small apartment.

Remember that the light in the bedroom should be soft

It is also very important that the entire room is evenly lit

If you are installing a sconce above a bed that is located in the far corner of the room, make sure that at the other end there is a floor lamp, a table lamp, or the ability to turn on the lighting above the closet.

You can install a mirror on the outside of the cabinet door: the reflection will compensate for the lack of light in another part of the room.

Before installing this lamp, it is worth calculating during repairs where your wiring runs. If you do not do this first, installation difficulties may arise later.

Advice! Stretch the cable to install additional lighting elements to the desired location during finishing work.

It is also worth determining the location of the switch: it should be located at such a distance that a person can easily reach it with his hand without getting out of bed. This will create additional comfort.

Bed shapes

Popular types of forms of hanging models.

Round

It requires particularly thoughtful placement, for example, round structures are recommended to be used in the design of terraces, spacious rooms or loggias in a country house. This product can be fixed in the form of one or several ceiling points.

Rectangular or square

The rectangular design is the most traditional shape of a bed, which fits perfectly with any style solution and does not cause planning difficulties. The square one, unlike the previous model, takes up much more space and therefore is not always suitable for an ordinary apartment.

Two-level

Beds located one above the other, using the same fastening, will be the most convenient and at the same time unusual option for a room with two children.

Unusual shape

In addition to the usual ones, there are a huge number of informal and non-trivial solutions, for example, a hanging hammock bed, a ball bed, a nest, a swinging cocoon looks quite original, and products in the form of a real ship or boat will delight any boy. An unusual bed on slings is often used for the recreation area; an elegant figured model, decorated with a canopy, would be appropriate to place in a girl’s room.

The photo shows an unusual hanging hammock bed in the interior of a city apartment.

Height

You can choose the optimal height for placing the TV on the wall in one of two ways. The first is based on the general ease of viewing it, and the second is based on medical recommendations and manufacturer advice.

• You can determine the height level where the bracket mounts will be located if you lie down in your favorite position on the bed, close your eyes for a second, and then open them sharply and immediately look at the wall. The point where your gaze rests will be the middle of the television screen. This means that this is where the main bracket will be located. When choosing this option, you should understand that parameters such as the distance from the bed to the wall and the diagonal dimensions of the screen are not taken into account. This means that when choosing this method, you cannot be sure of the safety and comfort of your eyes when watching a TV hung in this way.
• The second method is based on mathematical calculations and medical advice. The optimal distance between the eyes and a device with a liquid crystal screen is considered to be its diagonal multiplied by three, and for plasma screens this is the product of the diagonal and the number 4.

New TVs with an LED or 3D panel can have absolutely any screen diagonal size, but have different extensions, for example 720 or 1080 units. The mounting height of such TVs is calculated using a special formula:

1. For TVs with a screen extension of 720 units, the mounting height is equal to the product of the screen diagonal by a factor of 2.3.
2. For TVs with an extension of 1080 units, this value is equal to the product of the diagonal and a factor of 1.6.

At what height and where to hang sconces

At first glance, a simple question deserves separate consideration. The correct selection of height and location for sconces not only provides comfortable lighting, but also allows you to visually adjust the perception of the kitchen.

You choose the height at which it is best to place the sconce

For example, if you want to highlight the dining area as a separate section of the room, you can hang two sconces along its edges and a small chandelier or ceiling light in the center. Thus, the dining table will be visually separated from the rest of the kitchen by light fluxes.

The sconce allows you to visually delimit the table

In a room with a complex configuration, sconces allow you to simplify the distribution of ceiling lighting. Place a small lamp in each area of ​​the kitchen. For darkened niches, choose more powerful models.

Sconce allows you to shift the focus to certain areas of the kitchen

You can correct a low kitchen by completely abandoning the chandelier. In this case, it is better to use small flat-shaped sconces located around the perimeter of the room at equal intervals. This way the room will appear visually higher and more spacious, and comfortable lighting will make your culinary work easier.

Sconces installed directly above open shelves look unusual. Firstly, this provides additional dispersion of light - it becomes less bright and tires the eyes less. Secondly, you get lighting for the shelves and you can see everything that is on them.

Sconces over shelves

In addition, you can install sconces in those places that you want to visually highlight with lighting - above the bar counter, kitchen corner, sofa. Such a light accent will highlight the selected element of the interior, but will not overshadow the rest of the kitchen components.

Sconce over the bar

The sconce visually highlights the table

Semi-closed sconces with a luminous flux directed upward visually raise the ceiling, and with a luminous flux directed downwards, they lower it. This way you can smooth out the imbalance of the kitchen with too low or high walls.

By directing the light flow, you can visually change the height of the kitchen

If we talk about the optimal height, then it is 1.7-2 meters from the floor level. In this case, the light will softly diffuse throughout the kitchen and will not blind you when turned on. In addition, from the point of view of oculists, this height is considered to be as gentle as possible for vision.

If you are installing a wall sconce above the dining area, place it so that it is slightly higher than the head of the person sitting (based on the tallest member of the family). In this case, the risk of touching the sconce when sitting or standing up is minimal.

As for switches (if you've opted for a wall-mounted option), place them where everyone can easily reach them—a switch that's too low or too high can cause inconvenience.

Methods for connecting sconces

Turning on/off wall lights can be organized in different ways. If the position of the sconce is determined before the repair is completed, hidden wiring is carried out to it. Then the following options are possible:

• There may be separate switches on each lighting fixture. These are buttons or chains/laces that, when pulled, turn the light on or off. Then power is supplied to each lamp separately.
• You can make the food consistent. In this case, several lamps will turn on simultaneously, from one button on the first lamp in the chain.
• Power can be supplied from the switch (or its second/third key).
• You can install switches (pass-through switches), which will make it possible to turn on/off the light from two points (or more). This is convenient, for example, in a long corridor. You walk in and turn on the light near the door. Walk along the illuminated corridor and turn off the lamps at the other end. This scheme works from any side. This type of power supply is also convenient in the bedroom - turn on the sconce at the entrance, turn it off while lying in bed.

If the renovation has already been completed and you need to install wall lights, you will have to look for free sockets. Not all sconce models have a power cord, but connecting it is not difficult. Buy a cord with a plug (some with a switch, some without). Clean the ends and connect them to the terminals on the body. In this case, the best way to connect the wires is twisting and soldering, followed by insulation (preferably two pieces of heat-shrink tubing, but electrical tape can also be used). You can also use terminal strips (if you have somewhere to hide them).

Design ideas for outdoor beds in the country

Hanging products, complemented by a back and sides, form a comfortable sofa swing, which is perfect for decorating a veranda or loggia on a personal plot.

The photo shows a summer veranda at the dacha with a hanging wooden sofa bed.

In a gazebo in the garden, a lightweight rattan structure made in eco-design will look ideal; this decor can be supplemented with a mosquito net, which will provide the opportunity to relax and sleep in a bed outside, fully enjoying the views of the surrounding nature.

Everything is important: height relative to the floor, ceiling, eye level. And even the dimensions of the furniture in the room

If we are talking about illuminating the work surface and a lamp with a low suspension, the diameter of the lampshade is important. There should be at least 30.5 cm from the edge of the lamp to the edge of the table.

Advice:

Combine the furniture arrangement plan and the lighting plan if you are doing the project yourself. Apply the actual dimensions of the furniture and lighting fixtures, check whether you will hit your head on the lamp when getting up from the table.

At what height should the lamp be placed?

1. Dining room

Here the position of the lamp depends on the purpose of the room. Above the dining table, the distance from the tabletop to the lamp should be within 71 - 89 cm.

Tip: Pay attention to the size and shape of the table. If it is large, then hang the chandelier higher. For oblong tables or bar counters you will need several lamps in a row

To ensure optimal lighting, place them no further than 1 m apart

For oblong tables or bar counters you will need several lamps in a row. To ensure optimal lighting, place them no further than 1 m apart.

2. Kitchen

Above the kitchen countertop you need to maintain 180 cm from the floor to the lamp and 71-86 cm from the work surface to the lamp. The distance between the lamp and the top of the head of an adult in the house should be in the range of 46-70 cm.

3. Corridor

In corridors and hallways, lamps are hung so that there is at least 210 cm between the floor and the lamp.

Advice:

Check whether the lamp interferes with the opening of the cabinet (this happens in the case of built-in furniture: swing doors of the upper tier). Again, a furniture plan with the trajectory of the door opening, combined with a lighting plan, will help. The same applies to the entrance area, where a person gets dressed, that is, he will wave his arms, raise them - check whether there is a risk of touching the lamp or the cord of a hanging sconce.

5. Bedroom

The standard height for placing a lamp in a bedroom is 210 cm from the floor. If the lamp is hanging directly above the bed, make sure that if you kneel, the distance from your head to the lamp is at least 152 cm.

Important: In rooms with suspended ceilings, the requirements for the height of the chandelier are special. The canvas material is sensitive to high temperatures and can be deformed. Here it is especially important to maintain the distance between the ceiling and the lamp

It is generally not recommended to use overhead models with a closed lampshade, as they become very hot. Exceptions are lamps with LED bulbs. The best option for suspended ceilings in rooms with low ceilings is chandeliers with crystal pendants or with open shades directed in different directions.

Here it is especially important to maintain the distance between the ceiling and the lamp. It is not recommended to use overhead models with a closed lampshade at all, as they get very hot

Exceptions are lamps with LED bulbs. The best option for suspended ceilings in rooms with low ceilings is chandeliers with crystal pendants or with open shades directed in different directions.

7. Hall with a high ceiling

The optimal height in the hall is 200 - 210 cm from the floor to the chandelier. If the hall is double-height, the chandelier should hang no lower than the second floor level. If there is a window in the hall on the second floor level, the chandelier should be hung in the center of the window so that it can be seen from the outside.

IN YOUR CITY... Turn to the Pros
for Rewiring and Fixture Replacement - Electrical Installers on Houzz

Pros and cons of suspended structures

Like any other furniture attributes, these hanging models have their own advantages and disadvantages.

How to organize lighting

Theodor Van Geren, a collector and founder of the Museum of Erotica in Holland, once said: “Bright light pushes a woman away from love and brings a man closer to love.” We have a different opinion: “Darkness is the friend of youth.” These two statements contain the principle of the lighting scenario in the bedroom. At a certain moment it should be light (chandelier), the intensity of the flow should gradually decrease (backlighting, bedside lamps and sconces) and gradually fade away (bedroom night lights) until complete darkness.

Modern bedroom interior

Before starting the renovation, it is important to plan where and what chandeliers, spotlights, lamps, spotlights, and decorative lighting will be located, and in accordance with this, draw a diagram. There are four functional types of lighting:

General light in the bedroom is responsible for uniformly filling the entire room

The general light in the bedroom is responsible for uniformly filling the entire room.

Photo of a ceiling chandelier for the bedroom, balls in frosted glass are an ideal option

• Local or local, designed to highlight certain areas.
• The worker is responsible for directing the flow into the area of ​​the office, mirror, closet, and craft table.

Modern bedside lamps for the bedroom photo combination of elegant and massive objects

Decorative lighting in the bedroom creates beauty and a special mood, carries an aesthetic load, and emphasizes accents.

Original night lamps for the bedroom are decoration and the magical atmosphere of a fairy tale

When organizing lighting in the bedroom, you need to consider several rules:

Reflective surfaces in decoration and furniture will visually expand the boundaries of space, which is important for small rooms. For large rooms, you should choose direct flux lamps. Diffused lighting contributes to an optical increase in space. Wall-mounted pendant lamps for the bedroom with an upward flow will help to visually raise the ceiling, so that the ceiling appears lower; the flow of wall sconces should be directed downwards.

Wall lamps for the bedroom, photo idea of ​​how to visually raise the ceiling

• A narrow bedroom will appear wider if a row of ceiling lights is moved towards one of the walls; chandeliers located along the center line, on the contrary, give a narrowing effect.
• A cramped bedroom will visually expand if you put a bright LED strip on one of the walls.
• Transverse lighting in the bedroom will help to equalize the proportions of an elongated room, while longitudinal lighting will elongate a short room.

Pendant chandeliers instead of table lamps

In the bedroom, the play of halftones is important, but it is advisable to avoid glare; the flows from sconces, chandeliers, floor lamps, illuminated fillets and niches should be correctly distributed, and the interaction of all sources should be considered. In such an environment, a small chandelier with a soft, dissipating flow aimed at the ceiling sounds advantageous.

Chandeliers for the bedroom, photo of the classic model

Tip: For greater comfort, it is recommended to install remote and touch switches. No need to get up to turn the chandelier off or on.

Where to post

It is better to place cabinet lights at eye level or above your head so that the facades do not cast a shadow.

Ceiling soffits around the cabinet

Lamps with diffused light are suitable for mirrors; they should be placed on both sides, at head height. Lights from above will distort the image. Here it is better to use two types of lighting: warm evening and cold daytime.

Proper mirror design

How to create an atmosphere

The effect of soft light, different tones and scenarios that are aimed at creating an atmosphere of serenity and relaxation will help you create lamps and shades made of translucent, frosted and colored glass, and fabric lampshades. The combination of different types of lamps gives the bedroom a special charm.

Original night lights in the bedroom create the mood

Which lamps to choose

Incandescent lamps provide dim and harsh light; these are not appropriate in a recreation room. Luminescent ones have a bad effect on vision and create the feeling of an official establishment. The ideal option for the bedroom is halogen sources, plus they are durable and energy-saving.

Design work by Francesco Lucchese, sconce above the bed in the bedroom and floor lamp, decorated with Swarovski crystals

Connecting the wires

Next we will distribute the wires. The “phase” should be connected to the “heel” of the socket in the lamp, and the “zero” to the socket of the socket. The wires in the lamp have different colors, and to figure out which wire comes from where, you just need to look into the socket.

Connection by ordinary twisting is also allowed, but only if both wires are of the same metal and cross-section. In addition, the twist must be soldered and insulated.

We have a single-core copper wire coming out of the wall, and the sconce uses stranded aluminum wire, so a high-quality connection can only be obtained by using a terminal clamp.

We do the same with the second wire. Now we call for an assistant, and if he is not there, then we simply tie up the console for the convenience of further work.

On the back side of the device we connect the wires from the lamp, cleared of insulation in a similar way.

We tighten the screws with force so that the wires do not spontaneously jump out.

Ceiling lamp in the corridor: features of choice

With the modern variety of ceiling lamps, it is very difficult to choose a device for the corridor and hallway that will ideally suit the design of the room and correctly distribute the light in the space.

Types of ceiling lamps for the corridor:

• Directional and diffuse light;
• General and local lighting;
• Household and decorative light sources;
• Direct and reflected lighting.

There is a wide variety of ceiling lamps, varying in shape, size and price.
Hallway lights also vary in the type of lamps used for the fixtures.

The ceiling lamp in the hallway should be bright enough to fully illuminate the space. If one device is not enough, you need to use two or more lamps.

Height for sconces in different rooms

Bedroom

For a sleeping area, the optimal installation height of the lampshade above the bed ranges between 120-160 cm. The difference in the given figures is large, and there are a number of reasons for this

When choosing where to install the lamp in the bedroom, you need to take into account a number of factors:

1. Bed head height. The lamp should be located 20-30 cm above the backrest. However, here we are talking about a standard headboard. Sometimes this part is so high that the lamp cannot be installed even at a height of 160 cm. You should do this: hang the lamp just above the edge of the back, equipping it with a cord. You don’t have to hang the lamp higher than the bed, but mount it directly into the headboard.
2. Man's height. When choosing the lamp mounting height, you need to take human height into account. The switch should be positioned so that you can reach it without getting out of bed.
3. Type of lamp. The placement of the lampshade depends on the direction of the light flux. If it is up, the lampshade is placed lower. If the light is directed downward, the lampshade is installed higher than usual.

If there is a dressing table, sconces are often placed above it. The recommended height is the top third of the mirror. In this position, lighting will be sufficient both in the bed and near the mirror.

Children's room

In a children's room, the location of the lamp is usually chosen in the same way as in the bedroom - above the bed. If the lighting is intended for children's needs, care must be taken so that it is not difficult for the child to reach the switch. The optimal distance from the bed to the lighting fixture is 15-20 cm above the child’s height, taking into account the outstretched arm.

When choosing a light source for a nursery, you should, first of all, be based on safety considerations. The lampshade needs to be durable, preferably unbreakable.

For older children, the optimal location of the lighting fixture is 60-80 cm above the bed level.

Living room

In the living room, sconces are installed as additional light in the recreation area. A sofa or chair is usually placed nearby. The installation location of the lamp above the sofa is determined by the height of the seat: you need to reach the switch with your hand without getting up.

https://youtube.com/watch?v=WwvNvBaNpQ0

Corridor and stairs

In the corridor, the distance between the lighting device and the floor depends on the functional purpose of the lighting. For mirror illumination, the accepted value is 180 cm. In some cases, the optimal solution is 185-190 cm (if family members are particularly tall).

Stairs to the second floor are almost always equipped with wall-mounted lighting fixtures. You need several of them for good lighting. However, the main thing is not to overdo it: the lamps should not create obstacles when moving. Light bulbs should be placed at a level slightly above your head. If this is not possible, do not lower than shoulder level.

Kitchen

Whatever the size of the kitchen, they try to zone it into at least two areas - the dining room and the kitchen space. Lighting is a great way of zoning. Two wall lamps are placed next to the dining table, and spotlights are installed above the cooking area.

The acceptable height for placing sconces is from 70 to 80 cm above the table.

Bathroom

In the bathroom, lighting devices should be located near the mirror. Sconces are installed above the mirror or on the sides. In the first case, the position of the lamp is determined by the location of the mirror. If the sconces are on the side, they are installed above the middle part of the mirror. Another approach involves taking into account a person’s height: the ideal position is at eye level. In this case, it is advisable to purchase matte shades, as they do not dazzle.

Some design solutions include many small shades on both sides of the mirror. In this case, lighting devices are installed symmetrically.

Recommendations for selection

To choose a truly high-quality product that will fit particularly harmoniously into the surrounding space, consider the following tips:

• First of all, when selecting a sleeping bed, take into account the age category.
• It is advisable to choose beds and hangings made from natural materials.
• This design should be as harmoniously combined with the surrounding environment as possible.
• Only durable and high-quality fasteners and other parts should be used.
• When choosing a mattress for this rather heavy model, you need to take into account that it is high, dense and at the same time light.