It’s easy to choose a corner set for a small kitchen. In this article you will find several design projects with proper lighting, ergonomic and original.
In small apartments, when working on kitchen design, owners often give preference to options with corner arrangement of kitchen furniture. This layout has a lot of advantages, because with a small room, saving a couple of square meters can make life much easier. Below we will highlight and consider the advantages of corner furniture in the kitchen. Read on.
Corner kitchen set for a small kitchen - compactness: design, project with a corner sink, photo
Compactness is especially important for small rooms. Corner kitchen units are most conveniently located in a square-shaped room, less conveniently in rectangular ones. But you can develop a convenient option for a small room for a “rectangular” option.
- Corner furniture helps to make the most of space, turning it into spacious “storage” for many things.
- This is achieved by internal equipment of cabinets, mechanisms and devices - carousel shelves, magic corners, drawers, making the contents of the cabinet completely accessible.
- In addition, by using the corner of the room, we increase the working surface.
You can save work space by placing it in the very corner of the sink. This also provides many benefits. So pipes and communications are most often located in the corner, this will make it easier for the sink to access them. In addition, pipes, filters, siphons are located in the most inaccessible place in the corner, without wasting useful space.
Here are photos of the design and projects of such compact corner kitchens:
Corner furniture Corner furniture Corner furniture Corner furniture
How to arrange the furniture?
The shape of the room and its design features dictate the rules for placing the L-shaped set. Let's consider several options for ideas for a corner kitchenette set:
1. Trapezoid
This solution allows you to use the corner (in this case, sloping) with maximum benefit - it is possible to install a sink or even a small hob here. But if the room area is less than 6 square meters. meters, it’s better to forget about the trapezoid in the corner.
Photo from source: mirujuta.ru
Table top Cedar 8040/soft Crystal Marble
2. Right angle
If you don’t make a section here that will rotate or extend, this solution is unlikely to be truly comfortable to use. But the cabinet will take up minimal space, especially compared to the trapezoid.
Photo from source: pinterest.ru Tabletop Cedar 3198/Mw Rhodes Wood
3. Bar counter
If you have no more than three people living with you, the bar counter can be used as an alternative to the dining table. This life hack will also help you save the lion's share of useful space. The rack can be at the same level as the main modules or slightly higher.
Photo from source: mossebo.studio
Tabletop Cedar 7052/FL* Wotan Oak
4. Rounded corner
In terms of advantages and disadvantages, this solution is comparable to the very first option - the trapezoid. Most often used in sets with curved facades. It turns out to be a very harmonious combination.
Photo from source: res.cloudinary.com Tabletop Cedar 1207/BR Diamond dark graphite
5. Tabletop combined with a window sill
In this case, two ideas can be implemented:
1) Place the second part of the kit on the side of the window;
Photo from source: wattpad.com
Table top Cedar 3829/Nw Bunratti Oak
2) Use the window sill tabletop as a bar counter. That is, a design that can be used instead of a dining table.
Photo from source: blog.gnezdo-mall.ru Tabletop Cedar 3198/Mw Rhodes Wood
To implement “point one”, you will need to show maximum responsibility - create openings in cabinets and countertops to ensure free circulation of heated air coming from the radiators.
6. No lockers at the top
The row that is hung on the wall can be removed completely or only partly. Of course, since you deprive yourself of these cabinets, there will be fewer places where you can store kitchen items, but the room will begin to feel more spacious.
Photo from source: designwiki.ru Tabletop Cedar 1012/Cr White ceramics
The freed-up space is also possible and even should be used usefully: hang a beautiful picture there, a TV of an appropriate size, a clock of the original model, useful organizers. Moreover, you can also install ordinary shelves/racks here. You can also install a hood on the side of the wall where there are no upper cabinets, and a stove in the bottom row of the set.
Photo from source: remont-volot.ru Tabletop Cedar 5016/Pt Black Detroit
7. Ventilation box
In small kitchen rooms of high-rise buildings built in the last century, ventilation ducts are most often located in the corner. Therefore, this ledge needs to be played out in such a way that it is beautiful - make a box, place furniture on both sides of it.
Photo from source: kitchenok.ru
Table top Cedar 5270/FL Oak classic
8. Open top modules
Open shelves visually “lighten” the furniture set. This is especially true for small kitchens. But here you need to take one thing into account - you will need to wipe the surfaces from dust more often. For example, you can only “open” the closet in the corner. For example, arrange bottles of elite alcohol, beautiful glasses, and other decor.
Photo from source: stoleshnica-fasad.ru
Tabletop Cedar 4050/S Luxor
9. Pencil case
It is convenient to store necessary things here, and you can also install equipment in it. For example, a microwave oven/built-in oven.
Photo from source: pinterest.ru
Table top Cedar 316/1 Wenge wood
The area is so small that its value does not exceed six to seven square meters. meters? Installing more than two pencil cases will load the space too much, so this is not necessary.
10. Cabinets of different depths
This idea is interesting and useful for the design of small kitchen sets in the shape of the letter “L”, because it makes it possible to make the space freer without depriving it of functionality due to the fact that the set on one side will be shallower in depth than on the other.
Photo from source: pinterest.ru
Tabletop Cedar 2238/S Breccia light
Corner set for a small kitchen 6 square meters - ergonomics: beautiful economy class kitchen, photo
Any corner set for a small kitchen from 6 square meters to 8 square meters is ergonomic and convenient due to the application of the “golden triangle” design rule. Accessibility to the stove, sink and refrigerator should be good. Corner furniture makes access to these items as easy as possible and makes the kitchen very convenient for the hostess. After all, everything you need is in the required proximity; it’s enough to make half a turn.
Here are photos of beautiful economy class kitchens:
Corner furniture Corner furniture
Corner furniture
Corner furniture Corner furniture
Design of a small kitchen with a corner set: dividing the space into kitchen and dining room, photo
Corner furniture in the shape of the letter L harmoniously divides the kitchen. space for the dining room and work area (kitchen), making both of these functional areas as spacious as possible. Since the corner is used for the set, the table with chairs will be located according to the “island” principle, at some distance from the corner. If possible, the surface of the island part can accommodate the hob in order to free up the worktop of the main part of the set as much as possible. Here is a photo of the design of a small kitchen with a corner set divided into a dining room and a kitchen:
Corner furniture Corner furniture Corner furniture
White corner kitchen set for a small kitchen: originality of kitchen furniture, photo
Modern furniture stores offer economy-class kitchens in a wide range. But choosing something suitable for a specific room is not always possible. Therefore, the best option is to manufacture custom-made kitchen units. White kitchen facades are in fashion now. A room with such furniture will visually look more spacious and brighter.
- With an individual approach, all the nuances of the space in which the set will be placed are taken into account.
- The originality of the kitchen furniture plays a big role.
- The corner layout allows you to create a countless variety of headset options, taking into account the features, wishes and individuality of the hostess.
- Therefore, each person will choose what suits him.
Here is a photo of a white corner kitchen unit for a small kitchen:
Corner furniture Corner furniture Corner furniture
Corner mini kitchen sets for a small kitchen: lighting
The correct direction of the light is also important: it should fall exactly on the working area. The ideal option would be small lamps built into cabinets located in the corner. If the tabletop covers the space in front of the window, then this part of the workspace will be provided with natural light during the day.
In addition, such a design solution will add originality and expressiveness to the kitchen interior. Look at the photo to see how mini corner kitchen sets look for a small kitchen with the right lighting:
Corner furniture Corner furniture Corner furniture
- Corner furniture is also convenient because a small room becomes not only a comfortable area for cooking, but also for eating.
Corner furniture
How to use the space in the corner?
Modern models of sets from well-known and popular manufacturers are more functional: their designs do not allow valuable space in the corner for a small kitchen to be wasted. Corner cabinets are equipped with more complex and convenient mechanisms. Here are some options for how this part could be equipped.
Sink in the corner
It will be more convenient to use the sink if the corner is beveled or rounded. This will also simplify the task of installing and repairing plumbing fixtures.
Otherwise, you can install a sink with a drainer closer to the wall.
Among modern models you can find sinks with a bowl of unusual shape. You can also purchase a trapezoidal sink that perfectly matches the trapezoidal shape of the cabinet.
Another option is an L-shaped kitchen with a double sink in the corner, which is convenient for drying and defrosting. But with a small area, a double sink is not the best solution, because... Unnecessarily takes away part of the working surface.
Hob in the corner
Modern hobs can have unusual shapes, so choosing a suitable option to match the shape of the cabinet will not be difficult. Below are some good solutions for placing a stove with two or three burners in the corner.
In this case, the hood can be built into the corner upper cabinet.
Free-standing hoods take up more space, which is unprofitable for a small room.
With rotating section
This mechanism is also called a “carousel” due to the ability to rotate the structure with shelves 360 degrees. Here you can place food, dishes, kitchen utensils or cleaning products on rotating shelves.
Pull-out rotating sections
In this case, the shelves are fixed in such a way that when the door is opened, they can be pulled out sequentially according to the “train” principle.
Pull-out corner drawers
They work on the same principle as any ordinary boxes, but when closed they take the form of a set.
It is not recommended to place rotating, retractable mechanisms and a sink at the same time in the corner part of the headset due to the risk of damage to communications.
Small corner kitchen set with a bar counter: convenient and original
A small kitchen can be equipped with an original bar counter, which will serve as a dining table. This will significantly save space with a small corner kitchen unit. Usually the bar counter is located perpendicular to the tabletop - convenient and original.
Corner furniture
- It can stand either separately from the main part of the headset or be one with it.
Corner furniture
- There are bar counters on wheels, which will also be a good option for a small kitchen.
Bar counter on wheels for a small kitchen
A kitchen set should be convenient in any case, regardless of the number of square meters. But in a small kitchen the problem of free space is acute. Therefore, it would be right to allow designers to develop an individual corner set for a small kitchen that will fit perfectly into a small room. Good luck!
Dimensions depending on type
The dimensions of these structures may vary. If they are part of a headset, they are the ideal size for connecting with other elements. If selected separately, they must match other straight cabinets. The dimensions of a corner piece of furniture may differ depending on whether it is floor-mounted or wall-mounted.
Mounted
If you select a corner-type top cabinet, then its dimensions are equal to:
- usually these elements are not used for installing large-sized household appliances; it is allowed to make them not too durable and spacious;
- the width can vary from 15 to 80 cm, and this parameter depends on the shape of the cabinet, since it can be triangular, trapezoidal, L-shaped or some other;
- the standard depth is 35 cm, but when choosing it, the depth of the lower drawers is taken into account, since these elements must fit perfectly with each other, otherwise the kitchen will not look harmonious;
- It is recommended to attach a corner wall cabinet for the kitchen at a distance of about 50 cm from the lower cabinets, but a deviation of 5 cm in different directions is allowed.
The above dimensions are considered standard and frequently encountered, but it is possible to choose designs with completely different dimensions, since the main factor is that they should be spacious, easy to use and attractive. The corner structure can be so small in size that it can be placed in a small niche, if there is one in the room. Often attached above the hob, it will therefore be used to store various spoons or spatulas used in preparing various dishes. When choosing a facade, it is taken into account that there may be one door or several of these elements. You can choose models that are not equipped with doors.
Floor
If you choose a lower cabinet, then the standard dimensions will be:
- Dimensions are selected depending on the parameters of the selected kitchen unit, and it is recommended to take into account the dimensions, height and other parameters of the stove, which can be gas or electric;
- if the kitchen is small in size, then it is advisable to choose a depth not exceeding 50 cm;
- the standard height is 85 cm, but this parameter can be adjusted in certain cabinets, since for many people this height is considered too significant;
- The width varies from 15 to 80 cm, with 60 cm being considered optimal.
An interesting solution would be to purchase a corner structure with dimensions of 600x600 mm, which will have optimal dimensions, so it will be really convenient to use.
Usually the lower element is installed after the upper one is attached. The lower structure should be symmetrical to the upper one. You can choose an element with or without legs.
Under the sink
Quite often, corner floor products are chosen for the sink. Their sizes can vary significantly, as they depend on the dimensions of the sink itself. It is taken into account how the structure will be fixed, since you can buy a mortise or overhead sink. Due to the large number of different sinks, there are certain difficulties with the correct choice of the optimal cabinet, so it is advisable to first select the sink, and then the piece of furniture.
For such cabinets, standard dimensions are considered optimal, but if you need to obtain any unusual design, then all parameters are calculated individually. The width can exceed 60 cm, and the depth can even reach 80 cm, although using such a cabinet will be difficult. Usually, for large products, two facades are chosen for the sink, but you can choose a model with one door. An excellent choice for any room would be the Madeleine kitchen, which has an interesting look, affordable cost and high quality.
Angular
A standard corner piece of furniture has different parameters. It can be mounted or floor-mounted, and is also created from a variety of materials. The most popular is a corner structure made of natural wood, but its cost will be extremely high. It is necessary to constantly protect the wooden product from moisture, which is not always optimal for the kitchen.
An excellent choice would be products made from laminated MDF or plastic. When determining the optimal dimensions, the recommendations of professionals are taken into account:
- the width of the base, which varies from 10 to 12 cm, and this indicator is not affected by the selected type of stand, so you can choose either a design with legs or a solid cabinet;
- the height is usually chosen within 70 cm, but if the product is equipped with a sink, then it is advisable to choose a lower design so that the sink achieves a single level with all the other cabinets that are part of the kitchen unit, and the lower element ensures ease of washing dishes;
- the height of the tabletop can be from 2 to 4 cm, and this parameter depends on what material was used for its production, as well as what structure it has;
- the width also varies from 40 to 80 cm, and this parameter is influenced by the shape of the corner cabinet, the filling of the element, since it may have not only shelves, but also drawers, as well as other storage systems;
- the depth varies from 30 to 50 cm, and it is selected depending on the same parameter of other straight cabinets installed nearby.
Thus, the dimensions of corner cabinets can vary significantly. They depend on numerous factors, and the ease of use of the structure for its intended purpose should initially be taken into account, and this especially applies to a cabinet that will be equipped with a sink, since the comfort of washing dishes depends on the correct choice of dimensions.
The distance between the lower and upper corner cabinet is standard 60 cm, but this parameter can be easily changed, since it takes into account the height of the regular user of the kitchen.
