Rocking chair in the interior - 100 beautiful photo ideas

Are you used to leading a very active lifestyle, endlessly attending business meetings? Or could it be exactly the opposite and you are a homebody?

Be that as it may, it is appropriate in both the first and second cases to have a rocking chair in the house.

A rocking chair gives comfort, moreover, it gives complete rest. All this is due to the design of the chair. Its shape is rounded and streamlined, which contributes to the most comfortable placement of a person on it.

A rocking chair, due to the fact that it can swing, promotes relaxation and allows a person to gather all his thoughts together.

A rocking chair made of wood will bring peace and harmony to life.

How to fit a rocking chair into your interior

When you think about a rocking chair, an image of an old woman in a blanket with knitting needles in her hands, a basket with balls of multi-colored threads and a cat reclining by the fireplace appears. Of course, older people need the peace and relaxation that this comfortable chair gives them.

However, in our technologically advanced times, in which a young man feels tired and busy, there is a natural need for a comfortable, rocking chair. Moreover, recently the furniture market has presented a huge variety of different models of rocking chairs. Thus, increased demand has provoked furniture manufacturers and designers to create modern rocking chairs that will harmoniously fit into the design of any interior.

For indoor use, chairs are made from materials such as wood, willow or rattan; in some cases, rocking chairs are made from a combination of different materials or are supplemented with soft elements.

The most durable and naturally the most expensive rocking chairs are wicker chairs, which are made by hand. Wicker chairs will be completely organic in most interiors, with the exception of interior design in high-tech or loft style.

What is needed for making

• Wood (Any species you like)
• Band-saw
• Plane
• Planer (if available)
• Fraser
• Ball cutters
• Hand saw
• Chisel
• File
• Tape measure and pencil
• Wood glue
• Clamps
• Dowels 10 mm
• Drill 10 mm
• Drill
• Screwdriver
• Screws 40 mm

Wicker rocking chair

A wicker rocking chair made from materials such as wicker or rattan can withstand a lot of weight and is convenient to use. In addition, thanks to the peculiarities of the weaving, they do not become loose, which means they have a long service life. The only downside to wicker rocking chairs is that they are not cheap, but the quality of the product and long service life are worth it.

Teak

Teak is one of the best woods for outdoor furniture, better than other woods such as pine, oak or bamboo.

• Teak is durable and elastic because it produces its own oil. It is a hard wood, so it is not easy to dent or scratch it.
• It is completely wind and water resistant, so it can stay outdoors all year round.
• It is difficult to care for and needs to be treated regularly to avoid a 'silver patina'.
• Teak is one of the more expensive options.

Modern rocking chairs

Recently, designers have begun to pay more attention to designing comfortable and useful chair models.

When creating chairs, the most modern technologies are used to improve them. One of these innovative developments can be called the design of a chair with a pendulum mechanism, which makes rocking in the chair as smooth and long as possible, without much effort.

Sometimes in furniture showrooms you can find original models of rocking chairs, specially designed for book lovers, like the rocking chair with a shelf for books depicted in the photo. There are also models of chairs with built-in lamps or floor lamps.

Young mothers will be delighted with such an invention as a rocking chair combined with a crib for a newborn.

Manufacturers are not limited to just developing new designs; they are also trying to improve classic models of chairs, making them of higher quality. So they experiment with materials. Metal rocking chairs with a soft leather seat have recently appeared and have already gained popularity. Such products are durable, do not require special care and are durable. In addition, such rocking chairs look quite presentable and can harmoniously fit into any modern interior style.

• The principle of treating cancer patients according to N
• Hawthorn and rosehip tea: benefits and harms
• Thyme: beneficial properties and contraindications - ABC of Health

Plywood construction

It is plywood that allows you to obtain complex curved shapes, and without much effort or skill. For such a rocking chair, you must perform the following steps:

• Glue together several layers of plywood and clamp them in a position that matches the radius of the runners. It is important to make two elements at once and clamp them equally and at the same time in order to obtain identical parts and eliminate unevenness.
• After this, complete all other structural elements in accordance with the drawing. This is usually done with a jigsaw. Sand them and soak them in drying oil.
• On the side elements there are 3 through holes for the footboard and the middle part of its headboard.
• The side elements are connected using a special beam - this is done using either self-tapping screws or additionally reinforced with glue.
• Then the remaining frame slats are also secured with self-tapping screws, assembling the structure in accordance with the drawing and maintaining the dimensions.
• At the final stage, everything must be decorated with a protective coating of a matching color or transparent varnish.

Outdoor rocking chair

In private homes, a rocking chair is often placed in a flower bed or garden. And sometimes a rocking chair is installed on the veranda or balcony.

In both cases, a reliable wicker rocking chair is suitable, because such a product is more practical in outdoor conditions.

Master classes on making rocking chairs

To create a beautiful rocking chair, first a drawing of what is planned is made, and a drawing is developed from it. Next, all the necessary tools and materials are selected, and the details of the future product are cut out. After the structure is assembled, it is finished and dried.

To “test” the chair, just sit on it for a couple of minutes and rock. If problems arise with the stability of an item, they are corrected immediately. When an object falls back, the front part is made heavier, if on the contrary, the rear overhang is strengthened, combining the runners with an additional crossbar.

Made of wood

To make a completely wooden product, assembled “without a single nail,” you will need solid wide boards or high-quality furniture panels. The material chosen is thick (at least 25-30 mm) - the heavier the person sits and rocks in the chair, the thicker the parts are needed.

The design consists of five elements:

• two figured sidewalls with maximum dimensions of 100 by 90 cm, slots at the height of the seat, located 35-50 cm from the floor level;
• rectangular, slightly rounded in the upper part of the back, measuring 80 by 85 cm (in the widest part), with two slots for attaching the side panels in protruding places, one wide groove in the lower part for inserting a seat;
• seats - its dimensions in the wide front half are 85 cm, there are also two slots for inserting side panels, in the rear - 55 cm, depth - 45 cm, with a protrusion for fastening - 60 cm;
• the rear drawer is an oblong part, measuring 85 by 15 cm, having two slots for fastening to the sidewalls.

During the work, suitable variants of parts are developed or downloaded from the Internet and transferred to the boards. Then all the elements are cut out, polished, it is advisable to chamfer the edges by a few mm so that there are no sharp corners. The product is assembled, checked for stability, disassembled, each part is varnished, dried, assembled again, if desired, decorated with carved patterns, but preferably before varnishing.

Made of metal

The frame itself is made of metal, but the seat should be soft or wooden, for convenience and comfort. You can’t do without bent parts; you will also need a welding machine to connect individual elements to each other. First, a seat frame with several crossbars is made, then a seat and “runners” are welded to it, secured at three points. Wooden slats or a finished soft part in a wooden frame are screwed onto the back and seats.

Similar, but lighter options are made from aluminum and steel profile pipes.

From plywood

The plywood structure consists of two sidewalls, three transverse sides, several dozen lamellas of the back and seat. Average dimensions – 150 by 110 by 72 cm. This product does not have armrests, which greatly simplifies the manufacturing process.

Tools you will need:

• jigsaw, wood saws;
• Sander;
• pencil, square, ruler;
• metal tape measure;
• brushes;
• screwdriver;
• putty knife.

The drawing is transferred to paper, a pattern is cut out, along which the contours are applied to thick plywood (at least 30 mm) and cut out with a jigsaw. Both sidewalls are made completely identical and have no sharp corners. The drawers are made of timber, as are the seat and back parts. The dimensions of the three crossbars are 12 by 12 by 75 cm, the slats are 5 by 2.5 by 75 cm. The latter will require 35-37 pieces, depending on the distance from each other they will be placed.

Next, all parts are carefully polished, and small chamfers are removed. The ends must be processed twice. Afterwards, assembly is carried out - tightening the frame, attaching the seat strips. To do this, you need euroscrews and self-tapping screws - each lamella is attached in four places.

At the end of the work, the recesses formed above the screws are filled with wood primer and sanded. If necessary, tint with stain. If the product is planned to be used outdoors, it is impregnated with anti-rot compounds and varnished.

Baby rocking chair

A children's rocking chair is more of a toy than a place to relax. It is made of plywood and should not be too heavy so that the baby can rearrange it himself. The object consists of a back, two sides, a seat, and in the front part a horse's head is attached with a small crossbar on top so that you can hold on, and on the bottom for resting your legs. The seat is upholstered in soft fabric, foam rubber, and the wooden parts are painted by hand.

From an ordinary old chair, armchair

The most budget-friendly option for creating a rocking chair is to convert an old chair, or a not too heavy chair, into it. There are three possible varieties:

• with runners - to make the product, simply attach two wide plywood runners to the chair, fastening them with two strips in front and behind;
• glider - the base here rests firmly on the floor, but under the seat there is a pendulum mechanism;
• spring option - it’s difficult to make such an item at home, the base is fixed, inside there is a leg with a spring, due to which the swinging occurs.

Restoring an old upholstered chair that has served you for many years will save you money without having to part with your favorite piece of furniture.

Rattan or willow wicker

Often seating structures are woven from willow wicker, rattan, pine roots and even newspaper tubes. The latter are made as thick as possible, impregnated with PVA glue, painted, but the finished item is used only for children, as it is not very durable. Natural materials also require preliminary preparation.

The “classic” rocking chair is woven from willow wicker - it is light, openwork, and optimally suited for gardens, ethnic, and eco-interiors. The frame itself is made of twigs or vines, three to four cm thick, the braid is made of very thin ones. Individual joints are made from hemp and leather straps. The finished product is painted and varnished.

Rocking chair indoors

A piece of furniture such as a rocking chair is suitable for any room.

It’s easiest for those who have a fireplace installed in their home, because a rocking chair is traditionally an inseparable piece of furniture. It is enough to place an armchair by the fireplace in the living room, put a warm blanket on the rocking chair and the interior will be complete.

• How to properly collect, ferment and drink fireweed
• How to cure a runny nose quickly with folk remedies
• Sage: benefits, harm and contraindications | Food and Health

A rocking chair in an office looks good, especially since it’s very convenient to sit at the computer for a long time and sit down on a chair and relax.

Where to place the chair?

An outdoor chair will find a place in the garden, which is fragrant with aromas, in the fresh air.

An interior chair is furniture that promotes relaxation, rest, and relaxation. If the interior has a fireplace, then the chair should be placed next to it - what could be better than relaxing in a chair under the smooth swinging and crackling burning firewood?

To add coziness to your interior, you should think about buying a chair or look for a master class on the topic “how to make a rocking chair” and then transfer what you see into reality. A handmade chair will be of particular value to each family member.

Process of creation

When creating such a chair from plywood with your own hands, you need to choose the right dimensions. For the average person, the most comfortable height will be approximately 90 cm, if the chair is without a headrest. If with a headrest, then it should be about 115 cm. Sheets for such work should be even and smooth.

It is recommended to make the seat in such a rocking chair 50 cm in width and length, then you can sit comfortably in it. The backrest should be tilted approximately 15°. It is advisable to place the armrests slightly away from the seat, approximately 12-15 cm.

Preparation of plywood

To make a rocking chair, it is recommended to use FC plywood sheets. It is environmentally friendly and safe for human health. And also easy to process. Sheets with a thickness of 4, 10 or 15 mm will be required. You can also take thinner plywood, from which you can cut several parts of the same shape and glue them together. To do this, the surface is sanded with sandpaper, then the dust is carefully removed from it. The glue is carefully applied with a brush along the fibers. The glued parts are installed under the press. Thin sheets are cut with a knife, thicker ones with a jigsaw.

In order for a rocking chair made of plywood to serve for a long time, it is recommended to treat the material with drying oil, paint or varnish; you can also use fiberglass for this. You should choose a varnish without epoxy and polyester additives.

The plywood can be bent to give the piece the desired shape. To do this, it must be moistened, after which it can be bent as required and left in this position. After a few hours it will dry and take the desired shape.

Transferring a drawing

The prepared patterns are laid out on sheets and outlined with a pencil. At the same time, you should definitely save space to avoid waste of material.

Sawing

After marking, sawing is carried out to produce chair elements according to the drawing. Sawing is performed along the grain to prevent delamination. If a side cut is required, then notches are applied to the plywood using a bench knife. If you don’t have an electric jigsaw, you can use a special file for figure cutting. It is suitable for cutting curved parts with curves, large and small radii.

You should not cut straight along the drawn line, but step back from it outward by about 1 mm, so that you can then carefully clean the edges without violating the specified dimensions of the part. Otherwise, gaps may appear at the joints. After finishing cutting, the edges of the parts need to be sanded. To do this, use a file, a grinder, or a drill with a grinding attachment.

At specially marked places, holes are drilled for fastening the frame and all parts. The drill must enter exactly vertically, without tilting. At the end of this procedure, the entire surface of the sawn part is sanded with fine-grained sandpaper. Then varnish is applied.

Assembly

When all elements of the rocking chair are completely ready, assembly can be carried out. To connect, you need to use more than just wood glue. The mechanical load on the rocking chair is high, so additional fastening with screws and nails will be required.

All protruding parts are covered with glue and inserted into the grooves. They should be firmly embedded in them. Excess glue is removed from the surface immediately; do not allow it to dry out. After this, for the glue to harden, you need to leave the finished rocking chair for a day.

Making a rocking chair from plywood yourself is an opportunity to show your creativity and get a beautiful and useful piece of furniture. Such work will not require large material costs, and the creation process itself will bring considerable pleasure. The main thing is effort, accuracy and attentiveness, and everything will work out!

Fittings and finishing materials

Rocking chairs are usually equipped with a large number of small parts. These are screws, bolts, stitching, buttons and so on. Since reliability is important for a product, you should definitely make sure that the fittings are reliable. The parts must be in place and properly sewn or glued. If the model is made of wood, to increase reliability it is worth covering it with varnish.

Pay attention to the quality of the finishing fabric used to cover the seat, back and handles. The seams in the material must be even. It should also lie perfectly flat, unless otherwise provided by the design. The varnish or paint coating must be smooth and without an aggressive odor.