Installing a ceiling made of plastic panels in the corridor - recommendations

Anyone who decides to make a major renovation in the hallway pays little attention to how to decorate the ceiling. They say that the theater begins with a coat rack, and the house begins with the hallway. This is exactly the room that we see when entering the apartment. That is why its design must be perfect, and the design of the ceiling should not play the last role.

With the help of a ceiling covering you can radically transform the appearance of a corridor or hallway

Ceiling design in the hallway and corridor (photo selection)

To put the ceiling in order, use painting, whitewashing, and glue polystyrene foam tiles. These options are quite budget-friendly, but from an aesthetic point of view this does not suit everyone. Those who choose these methods do not assume that the most beautiful ceiling design methods are inexpensive and quite accessible.


Level with putty and paint with water-based paint - this ceiling covering solution was the most popular in the old days

Everyone chooses what the ceiling will be, taking into account their desires and the layout of the hallway. When creating a design, they take into account height, footage, and functionality.

  1. Long hallway. This is the most common layout in apartments. Ceiling decoration provides for the following: a visual increase in area, its shortening. In this case, the ceiling should be lighter than the walls, ideally white. Materials with a glossy surface will add volume, and the transverse direction of the lines will help expand the room. Plasterboard structures and LED lighting will also help give a long corridor a different look.


    Transverse panels or planks will make a narrow corridor visually wider

  2. Square corridor.
    The most impeccable layout where you can use all your imagination. This form allows you to apply all kinds of finishes and colors. For a more complex design, you can install multi-level plasterboard structures and use complex lighting. Two-level plasterboard ceiling in a square hallway

Examples

To more accurately imagine what a plastic ceiling in a hallway might look like, you can view several photo examples of such structures presented below. They will help you determine if this finish is right for you.

Types of ceilings

There are a large number of types of ceilings, each with its own pros and cons. Their diversity makes it possible to choose a more optimal design for decorating different styles.

Using the color and texture of the ceiling, you can visually change the overall perception of the hallway space, making the rooms wider or narrower, higher or lower

Suspension

Not a simple structure. To carry out installation, it is necessary to assemble a metal base, where the finishing is fixed. The frame can be either steel or wood, but gypsum sheets are mainly used. Such ceilings are suitable for high rooms, since when installed they “absorb” about 20 cm of free space.


The plasterboard system allows you to create a wide variety of shapes in two or more levels

Mounted

A relatively expensive method of finishing rooms, but it has many advantages. This ceiling is made from a very strong and fireproof polymer fabric with a polyvinyl chloride or fabric base. It is mounted as follows: first of all, a base of slats is installed along the entire length of the room, then the polymer fabric is stretched using hot air. Such a ceiling, as a rule, has a glossy surface and a wide range of colors.

A significant advantage of a stretch ceiling is fast and clean installation, literally in a few hours

The advantages of this material include its aesthetics and does not require careful maintenance. Many types of lamps can be mounted in such a design, which will significantly expand the room.

Rack and pinion

Most suitable for hallways, high humidity or unheated rooms. It is moisture resistant, tolerates temperature changes well, and has a long service life. This ceiling is most often found in private homes. To make it, thin duralumin slats are used; they have different colors and can be matte or have a shiny surface. The most popular are copper-bronze, golden, glossy types.


There are two types of slatted systems - slotted and slotless, with the latter there is practically no visible seam between the slats, so such coatings have the appearance of a continuous sheet

Cassette modules

A cassette ceiling is one of the types of suspended structures, consisting of square-shaped slabs. It has a number of advantages:

  • easy and quick to install;
  • has an attractive appearance;
  • light weight;
  • lasts a long time;
  • the design is quite durable;
  • does not require constant care.

All these qualities make this coating universal, which allows it to be widely used in construction.

Cassette ceiling made of slabs of different designs placed staggered

Soaring

The most fashionable, one of the latest innovations in ceiling design. The lighting is located around the perimeter of the room, so it feels like the glossy ceiling is floating.

LED strip lighting will make the interior lighter and weightless

Multi-level

It differs from the above in the complicated geometry and number of tiers. Such designs combine many types of materials.

The multi-level ceiling looks original and is well suited for zoning a hallway

Mirror tiles

This type of ceiling deserves special attention; it visually expands the space, makes the corridor high, and makes the room seem airy.

Thanks to the reflective ability of mirror tiles, a hallway with such a ceiling becomes more spacious

Expanded polystyrene or foam ceiling tiles

This material is made by foaming polystyrene. This method allows you to obtain an aesthetic, simple material. It is easy to process, which is why stores offer a wide range of this coating - it is most suitable for ceilings.


Ceiling tiles can harmoniously fit into any interior style, since a wide range of products allows you to choose the right design

Other varieties

Other options include a two-level ceiling; this design has a step. This allows you to hide wiring, ventilation holes and other communications. A significant advantage of this design is the possibility of zoning the room.


Built-in lights are often placed in the step of a two-level ceiling

The demand for plastic panels is no longer so great; it is mainly used in bathrooms and for office decoration. But if you think carefully about the color scheme and use it as a ceiling covering, you will get an original hallway interior.

PVC panels are affordable and easy to install, which you can do yourself

Nowadays you can rarely find such an option as sticking wallpaper on the ceiling in the hallway. However, this material is environmentally friendly and affordable. If you decide to use this method, you can find quite dense and textured wallpaper, as well as fabric ones, in stores.

Wallpaper can be used to highlight the internal level of a plasterboard ceiling

Plasterboard structures are widely used. This makes it possible to create a ceiling of any complexity, transforming the space. To install it, you do not need to level the surface; all communications can be hidden behind it.


A plasterboard ceiling allows you to hide defects in the supporting structure and hide electrical wiring.

Types of ceiling panels

There are PVC wall and ceiling panels. If a global renovation is planned, then installing the ceilings yourself will be very profitable.

To install the ceiling you need a lightweight material with thin walls. What is the difference between wall panels and ceiling panels?

Wall ones are stronger, but this strength is not necessary. This type of panel is more expensive in cost and heavier in weight.

Panels are classified according to the type of connection:

  • Seamless. The result of installation is a flat, smooth surface. The joints are difficult to distinguish; a tongue and groove are visible in the side part, with the help of which the structure is assembled.
  • Relief, or slatted. This type of panel looks like lining: the same stripes, but made of plastic.
  • Sheet plastic. The installation is used in few places, as it is complex. This method is suitable for finishing nonlinear surfaces.

Trendy design solutions in 2022 for finishing the ceiling in the hallway and corridor (selection of photos)

You should first think about what kind of ceiling you will have so that the whole interior looks unified. Here are some popular ideas from stylists.

  1. Curly ceilings will allow you to show your imagination and realize your design ideas. For finishing, drywall or foam plastic is used. The most original are figured stretch ceilings stretched over a frame.
  2. A matte ceiling will suit any interior. It is better to use such planes in multi-level installations. Spot lamps are better.
  3. Shiny PVC sheets will help visually enlarge a small hallway.
  4. With beams. This design can often be seen in apartments today. Used in Provence, country, rustic, loft styles. The beams are either whitewashed to match the ceiling, or they are made to look like wood, or they are load-bearing structures made of metal.

Decorative beams will add comfort and homely atmosphere to the interior of the hallway

For an original ceiling design, you need to choose the right not only finishing materials, but also shape, color scheme, and lighting. Lighting can be used to highlight the entire ceiling or any elements.

Curly ceilings consisting of geometric figures of various shapes help to make the interior of the hallway truly original.

Multi-level ceilings can come in a variety of shapes, but, of course, they are not suitable for a small hallway. Here it is better to use lighting to highlight the desired direction and make a laconic panel. If the ceilings are high, designers recommend installing built-in luminous panels. The result is the effect of windows through which light penetrates.


You can transform the ceiling surface into a beautiful decorative element using stained glass windows

Using thermal printing on a stretch ceiling, you can depict a mosaic panel, a painting, an abstract pattern or graphics - everyone chooses according to their taste.

A ceiling with photo printing allows you to create an original room design

LED threads located behind the suspended ceiling will create the effect of a starry sky. The constellations turn out to be very colorful, and their flickering is carried out remotely, for this they use a control panel.


Starry sky on the ceiling of a modern hallway

When creating a ceiling design in the hallway, consider the following: do not overload the ceiling with large structures or many elements so that there is no feeling of pressure. It should be comfortable and light, so that the updated design will please you for a long time.

Advantages and disadvantages

The demand for ceiling tiles is due to various factors. They have excellent aesthetic properties and highlight the interior of the room, made in a variety of styles. They are used in any room, be it an entrance hall, kitchen, living room, balcony or loggia. The main advantages of the material include the following characteristics:

  • low cost;
  • simple installation, almost anyone can do the work, and there is no need to buy additional special tools; for finishing, improvised construction equipment, which can be found in every home, is suitable;
  • most of the raw materials used for the manufacture of products are moisture resistant, which makes it possible to install structures in the bathroom, toilet, and other rooms with high humidity;
  • using the panels, perfectly flat surfaces are created, while it is easy to hide wiring and utility lines under them;
  • the coating allows you to mask any defects, such as cracks, irregularities, and floor joints;

  • if one of the elements is damaged, you can easily replace it yourself;
  • many models are distinguished by high heat and sound insulation;
  • most materials can be easily cleaned with standard cleaning products;
  • products are characterized as safe, even those made of plastic, they do not emit harmful substances;
  • the slabs are available in different sizes, which makes it possible to use them in rooms of different sizes;
  • Fire-resistant components are used for manufacturing.

Ceiling panels also have certain disadvantages. With their help it is impossible to create complex structures with several levels. On large areas the coating does not look attractive enough. Quality, and therefore service life, depend on the price. Panel finishing is unstable to mechanical damage and sunlight; some types begin to crumble after a certain time.

Photo ideas for the ceiling in the hallway or corridor

Accessories for plastic

To install the lining, a special plastic profile is purchased, which is intended for PVC strips. Standard length is 6 meters. It is also called molding and can be:

  • starting;
  • universal;
  • connecting;
  • with external and internal corner;
  • ceiling;
  • end

When choosing molding, pay attention to two important parameters. The grooves are selected taking into account the thickness of the PVC panel. The color should also match the shade of the panels.

What are they?

The coating of plastic panels comes in two types: glossy and matte. According to the structure, the drawings are film, and drawings that are applied with paint.

  1. Plastic lining. This type of PVC has long rectangular sheets. Product length: 3-12 m, width: 100-500 mm, thickness: 8-12 mm. Linings are used for mounting on walls and ceilings at any convenient angle. The color range of lining is usually only white; very rarely it is produced in another color.

Plastic sheets. This type has a large leaf width of up to 203 cm, length: from 150 to 400 cm, thickness - 0.1-3 cm. Dimensions vary depending on the brand of the manufacturer of this product. These panels have no joints. The front side often imitates tiles. They are easy to use.

Sandwich - PVC panels. This type is common for decorating a room. With its help, the room acquires an aesthetic and respectable appearance. The height of these products ranges from 3000 x 1500 mm to 3000 x 900 mm, thickness: from 10 mm to 32 mm. They are also used for partitions and window slopes.

Seamless panels. After working with such plastic panels, the surface will become perfectly smooth and even. They are produced in widths from 20 cm to 33 cm, lengths from 2 to 6 meters. This type is most often used for finishing ceilings.

Colored or patterned. A huge selection of different colors and patterns for the panels will allow you to choose the best option for your home. There are panels with relief, which are more expensive and look much richer. The sizes of such panels may vary.

Preparation

It is worth noting that even before visiting a hardware store, it is worth starting preparatory work. The first thing you need to do is create a plan. To do this, measure the length and width of the room and draw a diagram of the future frame.

Approximate diagram of a ceiling made of PVC panels

Then calculate how many sheets and what sizes you will need to make a suspended ceiling.

Remember that good and careful planning is the key to quality work and reliable insurance against various troubles and the need to do everything over again.

The second point of preparation is the removal of old finishing materials. If the ceiling was previously covered with a thick layer of plaster or paint, then all this must be removed, otherwise heavy pieces of old finishing can damage the frame or the panels themselves.

The last stage of preparatory work is marking the line of the future frame. To do this, use a tape measure to measure the height of all corners of the room. Find the one in which it is the smallest. You should measure 50 millimeters down from it and draw a strictly horizontal line (control it using paint thread and a level). The same line at exactly the same height should be drawn on the opposite wall. The suspended ceiling frame will be installed on them in the future.

Coating options

In addition to ease of installation, this finish has another advantage - a variety of color and texture options. PVC ceiling panels can be either matte or shiny, painted in a single color, or serve as an imitation of various natural materials. Particularly popular are those colors that imitate wood and stone.

If the part has a matte white surface, this is the most inexpensive variety of this material. It is 10 centimeters wide and most of all looks like clapboard. That’s what they are called – plastic lining. Such planks are not particularly beautiful, but their main advantage over others is their very low cost.

Another thing is painted options coated with a special varnish or film. Here the choice of colors is very wide - from simple solid colors to those imitating the pattern of a wooden board or marble surface. They cost more, but the dimensions of such PVC ceiling panels will be larger - 25 centimeters wide as standard. This makes it possible to assemble a smoother surface, with a minimum number of seams.

Seamless coatings are assembled from the most expensive variety of these slats. Their edges are made in a special way, which allows you to connect individual parts into a continuous plane, on which the seams between the individual fragments are almost invisible.

The most rare are planks with non-standard widths. Sometimes you can even find whole sheets of PVC. The advisability of using this type of plank is determined in each specific case separately, but there are no situations when wide parts cannot be replaced with narrower ones.

Self-installation

Installing plastic ceilings with your own hands can be done by a contractor who does not have any experience in performing such work. Self-cladding of any type of ceiling with plastic does not require specially purchased tools. Screwdrivers, drills, hacksaws, hammers, levels and plumb lines are always at hand for any home craftsman. All materials traditionally used for this purpose can be easily processed and adjusted to the required dimensions.

  1. To install plastic, it is enough to familiarize yourself with the work technology and study the recommended order of operations.
  2. Next, you need to prepare materials and get your tool into working condition.
  3. In order to minimize overspending and limit leftovers in the form of scraps, a preliminary calculation of the required amount of materials is performed. This is done using concepts from a high school geometry course. These include width, length, height, methods for measuring the areas of plane figures, their addition and subtraction, Pythagorean theorems of sines (cosines). Older men are often disappointed in the services of prostitutes, but not because they are all hardened and think only about money. You need to be able to find uncut diamonds in the dirt, select them in time and process them yourself. Many people want to get to young whores from Ufa who have only recently been working; they are a fresh “pussy” who has not managed to outrun all the guys in the area, is still trembling in bed and has a desire to please. Juicy pussies really moan with pleasure, get a thrill from sex with unfamiliar clients.
  4. Further, the contractor who performs the work on cladding and finishing ceilings with plastic will only need accurate calculations and accuracy.

You can install it yourself

Advice Do not forget about the use of protective equipment - glasses, respirators, workwear. To protect your head from falling objects from above, you will need a standard construction helmet. And in general, when finishing the ceiling with plastic, one cannot ignore safety requirements and fire safety measures.

Reliable stepladders and scaffolding must be in demand. During work, it is recommended to invite an assistant who, in addition to providing services in auxiliary work, will be able, if necessary, to provide first aid during accidental mechanical injuries or electric shock.

Facing

Facing is done in different ways:

  • direct fastening of panels to the ceiling;
  • the use of intermediate guide rails, pre-set, leveled and connected to the ceiling;
  • Pre-assembly of frames from wooden or metal parts and leveling them horizontally using the floor level is the best method, suitable for any ceiling.

Cladding is done in different ways

Wooden frames are made from slats with dimensions 50 x 20 mm. They are connected to each other with corners bent from tin, or wooden shorts with screws. Metal frames are most easily assembled from stock bent galvanized tin profiles used for plasterboard sheathing.

The flat frame structure is pre-assembled with alignment on the floor, then, after hanging, it is fixed in a horizontal plane using a water or bubble building level. The frame is attached to the ceiling using nails or self-tapping screws.

Advice When hanging and leveling, it is better to use galvanized sheet perforated strips, bent in the desired configuration.

The panels are attached to the frame in a standard way.

Additional attention should be paid to the design of transverse seams between panels, right and reverse corners at junctions with walls, door and window openings. For this purpose, elements called moldings are produced.

In the style of minimalism

To make frame slats, you need to take well-dried coniferous wood - pine, larch. This will make it possible to avoid warping and distortions of the ceiling surface during its operation. Before installing a wooden frame, its elements must be protected with antiseptics from rotting and fire retardants from fire. There are special deep penetration impregnations that combine these two most important protections for wood.

The voids created between panels, floors and frame elements are sometimes filled with mineral wool mats or foam sheets. This increases the sound impermeability and heat-insulating properties of the premises.

Practical material for ceilings

Rating
( 2 ratings, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]