Owners of small-sized homes face some inconveniences in terms of the need to dry things. The only correct solution would be to install a clothes dryer in the bathroom. This practical device makes the drying process easier. A variety of models will save space where every meter is important.
In order to comfortably dry washed clothes, a lot of devices have been invented today.
Clothes dryers in the bathroom interior. How to choose
For a small room, a hanging type design is suitable. It is convenient and does not require disassembly or assembly. The system does not cause any trouble, the internal space is free to move. Manufacturers offer special removable designs. This product, which fixes the rope, is installed on the protruding parts of the wall on the sides.
They take up minimal space, can withstand heavy loads and can be almost invisible to the eye.
For free access to bathroom items, after use you can remove the hinged part by securing it on the opposite side. Due to its compactness, it can be deployed for action if necessary. This device is also called an exhaust modification.
If it is impossible to install a folding system, when the area is occupied by a washing machine and sink, an original bathtub dryer will be your salvation.
There are portable models that can be placed anywhere.
If space allows, you can choose a folding stand. Thanks to the folding mechanism, you can keep it anywhere. When the laundry is completely dry, you can hide the pantry or closet. To speed up drying, it is better to install the device near the ventilation system.
A folding dryer with special flaps, which can be used to increase the hanging area.
If your home wash does not exceed three or four kilograms, you can give preference to a portable option by attaching it to a heating radiator.
Advice from experts
- If there is a small space between the strings, then the laundry will take longer to dry. Therefore, the optimal space is considered to be 8 cm.
- If you need to replace parts, then you should choose high-quality ones so that the savings don’t hit your pocket even further.
In order for the dryer to serve for a long time, you need to use it according to the instructions.
We decide on a design for drying clothes. Varieties, pros, cons of designs
First of all, it is worth deciding on the location of the structure and the size of the room.
Rope clothes dryer
A simple, common drying modification. The design implies the presence of ropes. The essence of use lies in the housing, inside of which there is a spring drum. There is a rope wrapped around it.
There are models with four and six lines.
Advantages:
- low cost;
- ease of installation.
Flaws:
- sagging, wear and tear of ropes after some time.
Not all models provide for a large load, but almost all provide the opportunity to save space.
Ceiling dryer
A stylish, practical vine can serve as a replacement for ordinary ropes. The model is made of strong steel tubes. Using a special block, the links can be adjusted: raised, lowered. Such a device can withstand the weight of things up to thirty-five kilograms.
Often the dimensions of such models are not suitable for drying bed linen.
This type of product is suitable for a combined bathroom. Place it directly above the bathtub itself.
Positive sides:
- installation speed;
- beautiful, stylish look;
- high level load capacity.
When installing, you need to make sure the wall is strong and leave enough space for unfolding the dryer.
Minuses:
- fixed structure;
- big sizes.
Features of the battery dryer
They are frames with metal strings. Horizontal installation on top of the surface is allowed. It is also attached at an angle to opposite sections. Anti-slip, there are plastic clamps. Variations are available for hanging on the side of the battery.
The bathroom dryer has small dimensions and is suitable for towels and socks.
The main advantage is the low weight of the product and ease of use.
Negative points:
- performs few functions and is inconvenient to use;
- You cannot dry bulky clothes in large quantities.
This dryer allows you to dry things quickly.
Floor dryer
The standard option is a tension frame. If the structure is unfolded, it occupies more area, while providing volumetric drying. When assembled, it is a narrow model that can easily be placed in the opening between a bathroom or an automatic machine.
Despite its small dimensions, it can easily withstand up to twenty kilograms of washed items.
There is a variety with several tiers. Outwardly it resembles a bookcase. It folds up and can be moved with wheels. A good option for shirts, shorts, T-shirts, T-shirts.
Pros:
- long service life;
- ease of construction;
- large capacity.
The only drawback is that there is a lot of space for such an installation.
Wall-ceiling models "elevator"
The exhaust system has good indicators of convenience, practicality, and versatility.
Can be mounted on a suspended ceiling or wall.
It looks like six risers, which are connected by wear-resistant metal elements. During the hanging process, the rods are adjusted towards themselves and return to the required height. Does not bend under a weight of up to twenty kg. The functionality of a wall-mounted bath dryer is similar to an electric dryer. The configuration is made in the form of a ladder, designed for hanging a small number of things at the same time.
Often the structure is placed in the bathroom or on the balcony.
Electric models provide instant drying by heating the product. Handle this product with care. It is better to connect to adults, keeping children away.
Electric clothes dryers for the bathroom are very popular today.
The advantages are the speed and quality of drying. The downside is the high cost.
Electric dryer
These designs are popular in the market, despite their high cost. They will be indispensable in situations of drying large items, jackets, blankets, bedspreads. A large assortment will satisfy the needs of demanding customers. They can be floor-standing or hanging.
The main feature of electric drying is the heating element located in mineral or natural oil.
Most of them are equipped with a special thermal regulator, which allows you to select a specific drying mode for a different group of things. There is a timer to adjust the functioning of the device.
Advantages:
- ability to withstand up to fifteen kilograms of load;
- silent operating principle;
- uniform drying of laundry areas and drying speed are achieved;
- ease of operation;
- take up minimal space when folded.
The design does not need to be connected to a hot water supply, unlike a standard towel dryer.
Flaws:
- high price;
- additional consumption of electrical energy;
- you must adhere to safety regulations.
If there is no free space
Dryers built into furniture
Such a device consists of elementary metal rods that are part of various reinforcement elements. Wardrobes, cabinets and chests of drawers are often equipped with dryers.
When folded, the device is completely invisible. Such a dryer can be integrated into the design if the color of the device matches the color of the furniture.
Dryer for small items
A pull-out drying rack fits under a bedroom table or on a kitchen counter, making it easy to hide when not in use. It is perfect for a small apartment due to its small size and functionality. But, like the folding model, it can only be used in conjunction with another dryer or for drying small items (underwear, socks, tights, T-shirts, children's clothes).
Battery mounts
This option is ideal in winter, early spring or late autumn, when the heating season in apartments lasts. We are talking about drying things quickly. Even if you have a balcony, this model of dryer will be no less relevant, because when it rains or snows outside, clothes will not be able to dry for a long time. And around the radiator it is enough to hang clothes overnight so that they dry completely.
Bathroom dryer for delicate clothes
Such devices are the best helpers for the housewife. They are light, compact, and, if necessary, can be folded and easily moved to another room. The most important thing is that such devices are suitable for drying delicate clothes, which are contraindicated to hand-wring or dry in a washing machine. Just hang them on the dryer and the water will flow straight into the bathroom.
Dryer over washing machine and octopuses
Drying rack above the washing machine, used for towels, shorts, trousers.
There is also an octopus hanging on it with hooks for socks and other small things. Also save a lot of space because one stack of socks can fit two.
Overhead dryer
There is also another drying rack outside the bathroom. This is a clothes dryer on the door to the children's room. I ordered from Ozone or Wildberry a long time ago. There's a lot in it. 4 towels or pillowcases. You can hang a sheet or duvet cover or blanket folded in half on the bottom bar.
Dryers built into furniture
Such a device consists of elementary metal rods that are part of various reinforcement elements. Wardrobes, cabinets and chests of drawers are often equipped with dryers.
When folded, the device is completely invisible. Such a dryer can be integrated into the design if the color of the device matches the color of the furniture.
Mobile open hanger
How to choose a quality dryer
When purchasing an accessory on which you plan to dry things in a humid room, you need to give preference to high-quality designs. Must be made of durable steel and aluminum material. Also, the pipes must be made of polypropylene, which is moisture resistant.
Stationary includes any model that is attached to the wall (panels) and does not move.
It is worth considering that aluminum may not always be of good quality. Evidence of this will be the price of the product. Remember, cheap aluminum models are susceptible to deformation under the weight of laundry. In the case of a low-quality rack, it quickly oxidizes, leaving rust and stains on clothes. Therefore, buy stainless steel products. Such a hanger will not cause any unpleasant situations and will last for decades.
Due to its technical characteristics, the polypropylene base does not react to liquid, does not change shape or properties.
There are options made from regular steel. The high cost indicates the use of a special protective layer in it, which prevents the rods from oxidation.
Materials for production
Materials are selected depending on the type of structure.
However, most often they include the following options:
- Rope has long been used for drying clothes. It is characterized by low cost and long service life.
- Aluminum dryers have excellent performance properties. The material does not rust or suffer from corrosion.
- Steel has a high level of strength. However, the average buyer rarely chooses such models, because they are expensive.
When choosing a clothes dryer, the material of its design plays a decisive role, affecting durability and strength
What dryers can you make yourself?
Anyone can make a simple device. At the initial stage, you need to decide on the type of construction and material. In this work you will need:
- two steel corners measuring 25 x 25 millimeters, one meter long;
- spring twenty by thirty;
- level;
- drill, set of drills;
- pencil for marking;
- mounting bolts;
- clothesline for drying clothes in the bathroom.
There are miniature models of dryers that need to be installed directly on the bathtub.
You need to start by drilling holes in the corners. Take the first copy and make holes at a distance of fifty millimeters in the middle. Then make holes on the second shelf of six millimeters in diameter with a stepwise transition of ten centimeters. Allow about three centimeters from the edge. Do similar actions with the second corner. Sand the finished result and paint it to make it beautiful. Paint with anti-corrosion properties is suitable. When the product is dry, it is necessary to calculate the optimal placement height.
On average, they can withstand up to 10 kilograms of wet clothes.
Attach the metal corner to the surface of the wall, aligning it clearly. Mark dots through the holes in the shelf. Perform manipulations on the opposite side. Try to make marks at the same level. Then drill and clean the places from dust. Screw the creation using bolts. Stretch the clothesline between the horizontal lines, thread it through the washers, and secure the ends tightly.
Such a structure is not intended for heavy loads. After a certain period, the ropes will sag. On the other hand, this is a budget option, made by hand.
These miniature options are well suited for drying small items.
The second simple way is to place the device on the bathtub. Prepare a block with a cross section of twenty millimeters in advance. The base will be parallel sections placed at a distance of half a meter. Attach cross boards to them on which things will be hung.
The size of the hangers is selected taking into account the width of the bath. The standard size is seven hundred millimeters. Treat the bars with abrasive sandpaper and apply a layer of varnish. It is enough to place such a craft on the sides of the bathtub. The lower tier will serve as a load-bearing component for the upper type slats, while at the same time acting as a limiter to prevent the system from falling.
Care instructions
To maximize the service life of the product, it is necessary to adhere to the operating requirements, not exceed the permissible loads and take care of the dryer. Maintenance rules depend on the material of construction.
For example, it is recommended to wipe plastic devices after each drying. In this case, you should not use products with an aggressive composition. Stainless steel products are the least demanding to maintain.
If the frame is powder coated, care must be taken to ensure that it does not crack. Otherwise, the resulting chips may accidentally damage the laundry. You should also periodically check the condition of the cords and replace them if necessary.
Dryers in the bathroom interior - interesting ideas with photos
Unusual structures cope with their main task and decorate any space.
Use compact models with imitation windows for small spaces.
Stainless steel dryers are ideal for such designs.
For connoisseurs of high technology, examples on the bathroom with a remote control are suitable. Mobile dryers are easy to move.
The sliding type is wall mounted. If necessary, it extends in one motion. Also hides back.
The forged structure placed under the ceiling looks exclusive. The combination of twisted decorative parts with wood will fit into the interior.
To extend their service life, the board must be regularly coated with protective solutions.
Factors to consider when purchasing
- A cheap design breaks down quickly, so it’s better to take a closer look at a more expensive analogue. This way you can save money even though the dryer is more expensive.
- If the device will be placed in a room with high humidity, it is better to buy a plastic or stainless steel dryer.
- It is necessary to clarify how much weight the dryer can withstand, because for a large family it is better to take a durable model.
- In order for the device to fit well into the interior of the room, you need to choose neutral colors or give preference to aesthetic options.
- It is advisable to inspect the assembly and sliding mechanisms in the store, so that there are no misunderstandings later and you have an idea of what to replace them with if they break down.
Ceiling
Popular approaches:
- Pendant with clothespins.
- Mesh tray for delicate items.
- Guide, mainly for trempels.
- Suspended traverse.
- Elevator (liana).
- Accordion (scissors).
The first two mobile samples need to be suspended from something, often from the structures of another dryer. The third option is somewhat specialized. The latest types are truly universal, capacious in terms of loading.
Wellex
The “Ball Chain” lifting mechanism is the highlight of the Wellex CH4200 . Removable, folding aluminum beams help combat bulkiness. Maximum load – 25 kg. The remote-controlled backlight is pleasing to the eye, but the price tag is upsetting.
A simpler, but no less functional younger sister - CH 4180 .
Manual drive unit “Ball Chain”:
LDN
Think about it: is the overpayment for the “name” and non-core options justified? The answer will be the assortment of the Tver company LDN (https://ldntver.ru/about/).
Liana-Lux is a simple, durable, budget alternative to foreign ones. Five rods, suspended on cords through rollers, are in the raised or loading position. Each is designed for 2.5 kg, roughly one duvet cover.
Steel rods with a diameter of 12 mm do not leave wrinkles on the fabric. The components are high quality powder coated.
DIY clothes dryer for the balcony: technology and manufacturing process
Ready-made structures for drying clothes on the balcony are much more convenient to use. They provide for all the nuances and little things that are important for the installation of the product. The kit includes not only brackets, cords, but also all the necessary mounting material.
To solve the problem of drying clothes, you don’t have to buy a dryer - you can do it yourself. Next, we’ll take a look at several simple options for making clothes dryers on the balcony with your own hands. They are so simple that anyone can make them.
An equal number of holes should be drilled inside the frame bars
Let's look at how to make the simplest model that can withstand a large amount of wet laundry. This design is suitable for balconies with two opposite walls. A small wooden strip needs to be installed on one of them, and a guy wire is attached to the other. Self-tapping screws in the form of rings are mounted at the same distance from each other on both sides. It is through these rings that string or other material suitable for drying clothes is pulled.
The use of self-tapping screws in the form of rings is very convenient, since ropes tend to sag over time, and this option allows you to easily adjust their tension.
To create an improved design with your own hands you will need:
- drill;
- special iron loops that are screwed in;
- plastic-coated wires with hooks at both ends;
- 4 large hooks, 2 of which should be on wheels;
- rope;
- wooden frame.
To make a dryer, you can use a ready-made frame or make it yourself
For manufacturing, it is recommended to use a ready-made frame, and if you don’t have one, you can make it yourself. For this, 4 screws and 4 wooden beams are useful, two of which should be twice as long. It is necessary to fold the wooden beams like a frame and connect them with screws. To make the structure stronger and more stable, you can use iron corners.
An equal number of holes should be drilled inside the horizontal bars of the frame. You need to screw the loops into these holes. The wires are fixed with hooks and loops on the frame. They need to be stretched along the entire length inside the frame so that they do not sag.
Holes are drilled in the four corners of the dryer frame through which a short rope should be inserted and secured with knots. Knots with loops are tied in the middle, to which a long rope is attached and threaded through hooks with wheels so that they smoothly lower and rise.
The third hook is fixed to the ceiling at some distance from the clothes dryer frame. 2 fixed ropes are threaded through it. The last (fourth) hook must be placed on the wall below the lowered level. Ropes are attached to it. Hooks and ropes placed in this way will make it possible to adjust the height of the dryer.
It is necessary to fold the wooden beams of the structure like a frame and connect them with nails
There is an even simpler option for making a ceiling dryer, which is perfect for people who have no skills in working with wood or don’t have the time for it. This method of constructing a hanging dryer takes no more than 5 minutes.
To do this, you need to take two plastic or wire hangers, and fasten wooden rods between them or simply pull a strong cord. Next, we fix the structure to the ceiling.
As you can see, creating clothes hangers for the balcony is quite simple. The main thing is to decide on the option that is best suited for you, and you also want the product to be easy to use and not bulky.
Helpful advice! Anyone who is not confident in their abilities can find a lot of different videos on the Internet demonstrating the process of creating a clothes dryer for the balcony.
The ropes are fixed with hooks on loops that need to be pulled along the entire length inside the frame so that they do not sag
general characteristics
Modern dryers can be installed in the bathroom, mounted on the ceiling in any part of the apartment, and they can also be taken out to the loggia and simply placed on the floor of the apartment.
They are made from lightweight and durable materials and are so convenient and easy to use that everyone can use them without exception. In addition, its installation does not take much time. If this is a model that is attached to the ceiling, then it may take a couple of hours to make it, and in other cases, even less time will be spent.
Wall mounted
A suitable option for a bathroom, loggia. The name of a particular sample is determined by the design features. Basic schemes:
- Cantilever: sliding (accordion), folding, stationary crossbar.
- String: rope, inertial (automatic exhaust).
- Ladder - typical design of an electric dryer
Wellex
The Korean brand has taken root in Russian homes. Interesting concepts make products stand out among their peers.
Wellex RH 2060 is a two-level design equipped with a scissor suspension that allows folding by lifting the bottom shelf. Load-bearing parts are made of stainless steel, the rest are made of polycarbonate and ABS plastic. Payload – 20 kg.
Wellex JR-4150 is a console that successfully combines an accordion and an upper rack. The load capacity is impressive - 30 kg with a maximum reach of 54 cm. In the folded position, it protrudes from the wall by 13.5 cm. The main structures are made of stainless steel.
Wellex ALB 2060 is a modern embodiment of the classic bathroom console. Strict, but elegant, does not rust. Compact: 60 × 31 × 60 cm. Tiers are adjustable in height, designed for 20 kg.
Arredamenti
Kledy is the perfect find for a small room. The wooden frame is fixed on the wall. The folding grid hanger locks in a fully or partially open position.
PHI
Often behind the loud sign “factory” there is hidden, at best, a design bureau, at worst, an office selling goods ordered in China. “Metal Products Plant” from Solikamsk is a domestic manufacturer that has grown from a workshop into a reputable enterprise with trading partners throughout the country. Dryers are one of the areas of development of a rich assortment.
Breeze-90 - saves space by replacing 4.5 m of linen cord. Thanks to steel tubes, it weighs only one and a half kilograms, designed for 10 kg. The polymer coating protects from moisture and can be easily wiped off from dust with a sponge and liquid soap. Warranty – 12 months.
Wave 160 is a representative of a family of three standard length sizes (140, 160, 180 cm). Refers to the wall-ceiling “liana” type. It makes sense to mount it close to the ceiling to take advantage of the height-adjustable crossbars suspended on a cord. An airy vine will overcome a weight of pounds.
Gimi
And again the Italians! The company's offer covers the entire range of devices of various sizes and price categories.
The classic rope system has been transformed into a rotary Gimi Rotor . The buyer can choose modifications with four or six cords: Rotor 4, Rotor 6. The total length of the rope, respectively: 21, 14 m.
The plastic case and mechanism are not afraid of water. Dirt and plaque from external surfaces can be easily removed with a sponge.
The telescopic principle is a feature of the Gimi Telepack 100 . Aluminum guides are connected to durable plastic cages. Length: overall – 1 m, useful – 7 m. Load capacity – 7 kg.
