PVC panels for the kitchen: pros and cons of plastic finishing

Types of Vinyl Wall Tiles

Several types of PVC modules are known; rectangular and square products are common. There are single-layer and multi-layer types. By type of fastening there are: self-adhesive, without applying glue, with a locking connection.

Tiles are used to decorate walls. This material may look like linoleum squares cut into slab shapes. There are a huge number of colors and dimensions of vinyl tiles. Decorative plastic tiles for walls and floors are known for their wide variety of designs.

To some people, the name brings to mind the faded squares of plastic used to lay floors in hospitals and cafeterias. PVC tiles copy well: wood, metal, natural stone, ceramics, etc.

In European countries, vinyl tiles are very common, but in our country they have recently become in demand. Its cost is many times lower than the price of tiles, despite the fact that its service life is short, but it looks unusual and is becoming more and more popular among finishers.

Application area of ​​tiles

As mentioned above, the scope of application of PVC cladding is quite wide, and it can be used to cover walls in almost all rooms. But it was also said that this material comes in different types.

For example, a floor covering is thicker than a similar material for wall cladding. This is due to the increased load that the floor covering will be subjected to. In this regard, PVC floor cladding weighs more, so I do not recommend attaching it to walls, as it may simply fall off.

In addition, the floor slab is larger in size to cover more area and reduce installation time. I advise you to install the floor version of this material in corridors and vestibules, since there the load on the coating is maximum.

All types of PVC boards have excellent moisture resistance. Therefore, it is often used for complete cladding of bathrooms, swimming pools, and, as already mentioned, for cladding floors in vestibules, verandas and corridors, since these rooms, in addition to a large load on the coating, are also characterized by high humidity.

PVC tiles are also used for cladding ceilings. The material for ceiling cladding has the lowest weight among all types of this cladding. I think it’s clear why, to prevent peeling off under its own weight.

PVC tile grade

Among the construction products there are polyvinyl chloride and quartz-vinyl tiles. The second has greater strength and wear resistance. The tiles are assigned wear resistance levels:

1. Products of classes 21 - 23 are intended for residential use.
2. Products of class 31 - 33 are suitable for office and public organizations.
3. Samples of class 41 - 43 are used for industrial buildings.

Even when selecting, you need to understand what the washability group is? To describe it, letters in Latin are used: F, T, P, M, where T means the most resistant to abrasion, and F means the least resistant.

Peculiarities

Very often, without complete information about the new products that appear on the construction shelves, when deciding to renovate the bathroom, consumers use traditional materials, in particular tiles, without suspecting that there are worthy alternative options for finishing a given room. Moisture-resistant MDF panels, as well as PVC products, are high-quality and attractive products that have proven themselves in practice as a practical and durable finishing material for bathrooms.

The features of these products include ease of installation compared to conventional tiles, the installation of which requires special skills, and the work itself often takes several days, which is very inconvenient for residents of an apartment or house.

The panels are resistant to high humidity and are also able to imitate the texture of tiles. The main function of wall panels, in addition to the aesthetic component, is to protect the base from moisture, since high temperature and water contribute to the formation of fungus and mold on surfaces.

In order to get rid of such unpleasant situations in a tiled bathroom, aggressive chemical compounds are used that help get rid of microorganisms, but at the same time gradually destroy the material itself. When using wall panels, the risk of such situations occurring is minimal, and the appearance of the products is not inferior in its attractiveness to expensive finishing.

New materials for finishing kitchen walls: characteristics

Due to their composition, new materials have a number of properties not inherent in traditional ones. Tiles made from such raw materials can withstand high temperatures. Therefore, it is used not only for finishing the gas stove area, but also for cladding the fireplace surface. Some types of materials are resistant to harsh weather conditions and are suitable for exterior decoration of buildings. Due to the use of original technologies, the tiles are not afraid of dirt and regular use of cleaning products. Its service life reaches 40 years.

Due to the low price and popularity of using materials, a careful approach to their selection is necessary, since there are a large number of fakes.

Advantages and disadvantages

Like any other material, panels have strengths and weaknesses. The advantages of the products include the following product qualities:

• A good level of moisture resistance, thanks to which the panels are recommended for use in bathrooms.
• Fast and easy installation of products - anyone can cope with the task of installing MDF panels or plastic elements; it is enough to have minimal construction experience. To perform the work there is no need to purchase specialized tools; the products are lightweight.
• To install the panels, you do not need to provide a perfectly flat base, as required by the tiles.
• Thanks to the use of such products, the level of thermal insulation increases, since plastic and chip elements are warm raw materials.

• The level of sound insulation of the bathroom increases, which is important for residents of apartment buildings.
• The products have such qualities as strength and long service life, however, the correct installation of the products in this case plays an important role.
• The elements do not require special care; to keep the panels clean, it is enough to wipe the surface with a damp cloth and avoid prolonged exposure to water.
• Wear resistance and resistance to mechanical stress.
• An acceptable cost, which includes the absence of costs for the work of specialized hired personnel and the purchase of expensive consumables.

The disadvantages of moisture-resistant panels for the bathroom are:

• Unlike ordinary tiles, MDF finishing products swell when immersed in water. It follows from this that in situations where the bathroom is flooded from the top floor, the material will be irrevocably damaged.
• Low level of strength of panels upon impact.
• Some models lack grooves at the joints between products, due to which the gaps will need to be filled with sealant.

For kitchen walls

In addition to classic materials for covering walls in rooms with high humidity, PVC tiles are used for kitchen walls. It is made on the basis of polymers, has a durable, multi-layer coating and is made like tiles.

Quartz chips are introduced into its base, which gives the product special strength. Due to this, the material has high wear resistance. Briki tiles are often chosen for the kitchen.

a brief description of

Although all materials have the same name, their properties are different. First of all, the degree of moisture resistance differs. PVC can withstand direct contact with water without harm, MDF and fiberboard - provided that the cuts are properly sealed and the integrity of the laminating film is intact. Chipboard-based panels are the most susceptible to moisture, so, if possible, they are best used for finishing the toilet, kitchen, corridor and other rooms with relatively normal operating conditions.

Looks like wood, but is actually wall panels

MDF wall panels

In areas with high humidity and the possibility of direct water ingress, MDF-based wall panels can be used. This material uses high pressure technology, resulting in a very dense board. The wood particles are compressed so tightly that water practically does not penetrate between them. To improve the characteristics, additional binders and impregnations are added to the composition, which make the base almost waterproof. As a result, moisture-resistant MDF wall panels feel more like plastic.

There are different options

MDF sheet panelsThis is what a wall looks like after finishing with tiled wall panels

A laminating film with a pattern is applied to this base and the whole thing is covered with a thin layer of transparent dense polymer. This film is an additional barrier to water and it is thanks to it that moisture-resistant wall panels for the bathroom can be used even in areas where water is directly exposed.

This type of finishing material has a peculiarity: to make the finish waterproof, the joints are coated with sealant. They also pass through the junctions with the floor and ceiling. To prevent moisture from getting inside the material through the cuts. This installation method guarantees a long service life of the finish, even in damp rooms.

How to decorate a kitchen with PVC panels

You can try to use plastic in decoration so that it looks organic and does not “cheap” the room.

Take a closer look at the plastic lining. At first glance, high-quality, textured “planks” imitating wood cannot be distinguished from real ones. White plain lining under bleached pine needles can be used to decorate the walls and ceiling - selectively or completely. In order not to overload the space with plastic, although indistinguishable from wood, you can allocate separate zones for it - at the dining table, in the work area near the headset, an apron. And on the ceiling, imitation wood paneling will be an interesting alternative to stretch fabric. It is better to take textured lamellas that are rough to the touch. Laying boards horizontally on the walls will expand and lengthen the room, while laying them vertically will stretch it upward.

Unsplash

Instagram @finerspaces_kelly

Drawings rarely look good. It is still lifes and seascapes on the walls or apron that simplify the interior as much as possible. To decorate a kitchen backsplash with a PVC panel, you can use imitation brick. An apron made of white bricks, which are visually indistinguishable from the classic “hog” tiles, will look good.

Instagram @kimmyrae_

Instagram @mamochka_kate

Unsplash

A wall with a marble pattern will look stylish. In a light, minimalist interior, such an apron looks appropriate, especially in combination with a suitable countertop.

Instagram @designedbycourtney

Pixabay

Like plastic bricks, PVC mosaic is an original solution for decorating the cooking area. It is better to stick to monochrome and not choose bright unnatural colors; white, beige, gray, ivory are ideal. Between matte and glossy, it is better to choose matte. This surface looks more natural. You can experiment with gloss in a high-tech or minimalist interior, but it is better not to make a “mirror” wall in this area.

Unsplash

Pixabay

Between lining and sheets, it is better to choose the first. It is extremely difficult to find sheets with a suitable texture so that they do not look like a piece of plastic glued to the wall.

Color spectrum

As already mentioned, wall panels have a rich range of colors, but among all the variety there are several options that are most in demand.

White

White cladding color is considered classic and quite common. Despite the abundance of colors, many apartment owners still prefer to have a snow-white bathroom. If you are a fan of Art Nouveau style, then white PVC panels are your ideal option. The big advantage of this cladding is its unobtrusiveness; you won’t get tired of the white color for a long time.

White panels require special attention; if not properly cared for, the material may turn yellow or become covered with unattractive stains. Dust and dirt also become very noticeable.

Selecting a color and calculating the amount of material

Having decided on the idea of ​​kitchen design, you should move on to selecting color schemes for walls and surfaces. It is important that the color scheme is in harmony with the shade of the floor surface and kitchen furniture. Wall cladding in two colors is widely popular. The lower part of the wall panels should be darker than the upper.

Having chosen the panel model, you need to calculate the amount of material required. To do this, you should find out in the specification the width of an individual part. This will allow you to correctly calculate the number of slabs that will be required to finish the kitchen walls. Having calculated the surface area for cladding, you need to divide it by the area of ​​one strip.

The characteristics of any panels contain indicators of the width of individual elements. This does not take into account the mounting ridge.

To join the ends and carefully trim the corners, you can use special profiles and moldings. To correctly calculate the number of auxiliary elements, it is advisable to consult with a seller or craftsman who specializes in PVC panels.

Blue

The color of the sky will never go out of style. A blue bathroom is the dream of many romantic people, those who like to dream and fly in the clouds. Blue color relaxes, helps you forget about the bad and tune in to the positive. A blue bathroom will become a real relaxation room, which is so necessary after a hard day at work.

A variety of blue PVC panels are materials with white streaks randomly distributed across the canvas. The room will look very original and unusual.

Lilac

Lilac panels are considered a real trend this year. Lilac refreshes, uplifts and puts you in a positive mood. Surprisingly, the cladding of this shade exudes incredible light, and the panels themselves seem transparent.

Reds

Bright, bold shades are not for everyone. If you are a calm person and like to relax in a bubble bath, then it is better to choose a different color for the room. Red shades are invigorating, and to some extent incite aggression if the day was not very successful.

Black

Oddly enough, the gloomy black color of the panels is in great demand. Manufacturers do not really like to put black material on the market. Therefore, there is a real hunt for him. If you opt for dark cladding, try combining the panels with cheerful colors. This will make your bathroom look stylish, but not gloomy.

Photos of kitchen aprons for the work wall

>

Of course, each owner of a house or apartment makes his own decision about whether to install an apron in the kitchen made of plastic or whether to give preference to other finishing materials. But if the choice fell on plastic, then it is best to choose elements made of polycarbonate, which is characterized by higher strength and good performance characteristics.

Dimensions

The main characteristic of the panels is size. To select the required dimensions, you should proceed from the area of ​​the room.

Sheet products have the following dimensions: width - 1.25 m, length - 2.5 m, with a thickness of 3 to 7 mm. Tile panels come with a square side from 30 to 95 cm. Slat elements are produced with a width from 13 to 28 mm with a length varying from 2.5 to 3.8 m. The thickness of the lamellas is 8-14 mm.

In order to rationally use material during the installation process, it is worth purchasing the type of bathroom panels that will have a minimum amount of waste generated when adjusting them to the dimensions of the base.

Installation

There are several ways to lay panels:

• using glue or liquid nails;
• on a special frame.

The latter option is recommended for slatted panels, and products made of PVC and MDF are perfectly fixed with adhesives. If necessary, the free space between the products and the wall can be filled with insulation or this space can be used for arranging electrical wiring.

The arrangement of the frame is carried out using an aluminum profile using the following technology:

• the arrangement of profiles is carried out, the stiffeners of which are placed horizontally;
• the fastening pitch is calculated based on the width of the product, but this value should not exceed 50 cm;
• Next, the slats are prepared - it is recommended to additionally treat the ends of the MDF elements with sealant;

• in cases where the floor in the room does not have a sufficiently flat surface, the resulting gaps are hidden with the help of a plinth;
• all areas where switches, sockets or communications output will be located must be marked;
• The slats are fastened with self-tapping screws or staples; in some cases, you can use special clips.

Installation of panels with glue can be carried out in bathrooms, where the bases have a smooth geometry and also do not require specific preparation. Otherwise, you should pre-finish the walls with plaster and prime the surface.

After completing such work, you can begin gluing the panels. The technology for performing this task is as follows:

• The joints between the elements of the composition, including corners and places where panels are attached to the floor and ceiling, can be decorated using moldings. This option will provide a more neat appearance of the surface. These works are not necessary if the components are secured using grooves or other fasteners.
• The composition can be applied to products pointwise or in the form of zigzags.
• The panel with the composition applied to the back side is applied to the wall and pressed over the entire area.

• If excess glue appears around, it must be carefully removed from the base.
• Installation of panels should always start from the corner.
• All unattractive places where cuts on the edges of products are visible are best hidden under the baseboard. It can be made of any material and have a similar color, or vice versa - serve as a contrasting component of the created composition.

Laying technology

Now let's talk about how to properly lay PVC tiles on a wall, although it is difficult to call it masonry, since mortar is not involved in this process, which is typical for ceramic tiles. Polyvinyl chloride tiles are glued rather than laid.

For example, let's take the installation of PVC sheathing on the walls in the bathroom. Why in the bathroom? Because this is the most popular place to use this material. There are no significant differences between laying these tiles in the bathroom and in any other room.

The first thing to do is prepare the surface. This must be done with any cladding, and this option is no exception. Surface preparation includes operations such as cleaning the wall of old coating, such as paint. Cleaning from dirt and dust.

If there are significant protrusions on the wall, they need to be knocked down with a hammer drill. The recesses must be covered with plaster and carefully leveled, then allow the solution to dry. Next, you will need to alternately apply two layers of deep-action primer to the wall, and the second layer should be applied only after the first has dried. As soon as the second one dries, you can begin installation.

Before starting work, the tiles should lie in the room for a while so that the temperature of the material is equal to room temperature. Also, installation cannot be carried out at temperatures below +18 Celsius.

For walls, he uses three types of PVC tiles, self-adhesive, using mounting adhesive and with a tongue-and-groove fastening system, but for this type you need to make a wooden sheathing of the wall before installation.

Any type of cladding must be installed starting from the center of the wall and gradually moving towards the edges, laying row after row. Self-adhesive tiles are applied to the wall, and, gradually tearing off the protective paper, they are glued to the surface.

If you are using a material to which you need to apply adhesive yourself, then apply it in an even, thin layer to the back of the tile and carefully apply it to the wall. You need to apply the adhesive using a notched trowel, so the glue will lie more evenly.

After gluing each tile, excess air must be expelled from under them. To do this, take a rubber roller and, with force, roll it over the cladding. This must be done on each tile, otherwise the material may come off due to the fact that it is not sufficiently fixed.

Starting from the center, after gluing the first unit of cladding, install the remaining cladding. It is important to ensure that the tiles fit together very tightly; ideally, after completion of the work, the seams should not be visible. This is especially important in the bathroom. Since seams are potential points of moisture penetration under the skin. If this happens, there may be an unpleasant odor, the spread of fungus and other infestations, and you will eventually have to remove the siding if moisture does not cause it to fall off sooner.

Important! If during installation of the cladding, excess glue gets onto the outer covering, it must be removed immediately by cutting it off with a utility knife. There is no need to wipe with a rag; this will not help, but will only make the situation worse.

Having reached the edges of the wall, excess, if any, needs to be cut off. After this, we can assume that the installation process is complete, you just need to wait until the glue has completely set, which usually takes up to 3 days, and wash the surface using detergents. Here is such a simple installation, just simple, beautiful and reliable material.

Functions of a bathroom apron

To hide the space under the bathroom, install a store-bought screen or make it yourself. To obtain greater benefits and access to communications, such an apron is equipped with sliding or hinged doors. Behind the partition there are shelves on which household chemicals and other small items are stored.

Installing such structures helps improve sanitary conditions. Moisture will not get under the bathtub, which is a favorable environment for the development of mold.

Existing technologies allow you to design the screen in different ways, for example, to imitate an aquarium, sea, etc. The beautiful appearance of modern panels organically complements the interior design of this room.

Choosing the right wallpaper

The range of vinyl wallpapers today is so diverse that many people simply get lost in it. But you should choose this finishing material carefully, especially in the case of kitchen wallpaper:

• The texture of the coating should not be too porous. An excessively porous material will absorb everything that comes into contact with it: moisture, grease, dirt. For the kitchen it is better to choose wallpaper that is smooth or slightly embossed.
• If the walls in the kitchen are long, then choose rolls 75 or 100 cm wide. If the kitchen and walls are small, then rolls 50 cm wide will be enough.
• If there are minor defects on the surface of the walls, then it is best to choose thick wallpaper that will cover all the defects.
• The color and texture should be selected depending on the overall interior design. Keep in mind that bright furniture will look better against the background of beige, white or gray wallpaper.
• Any dirt will be visible on plain wallpaper. So for the kitchen it is better to choose a finishing material with a print.
• Always purchase wallpaper with a reserve. The width of the walls should be divided by the size of the roll, thus calculating the number of strips. Then the length of the roll must be divided by the resulting number of strips, determining how much area you will cover with one roll. Thus, count the number of rolls and add to it a reserve of 1-2 strips.

Installation of a finished apron under the bath

If funds allow, and you don’t want to make a screen yourself, you can purchase a factory model. When choosing it, you need to take into account the shape and size of the bath. Installation of the finished product requires a minimum of time and effort.

Required materials and tools

To perform installation work you will need the following tools and materials:

• building level;
• measuring instruments;
• screwdriver;
• open-end wrench;
• fasteners;
• ready screen.

Preparation for installation

Before installing the screen under the bathtub, all repair work must be completed in the room, water supply and sewerage must be connected. If the hot tub has been in use before, dust and dirt may accumulate under it and must be removed.

In addition, they make sure that there is no fungus or mold underneath on the floor or walls. If they are identified, they must be destroyed; this is done with special means.

When preparation for installation is completed, before starting installation of the panel, check its contents.

How to glue vinyl wallpaper?

Algorithm for covering a kitchen with vinyl wallpaper:

1. First, choose the place where you will glue the first sheet. After this, use a level to draw a vertical strip from the ceiling (it will serve as a guide). Be sure to leave about 20–30 mm of margin, since errors are inevitable. This is especially true for corners where a margin of several centimeters is required.
2. Next, apply glue according to the instructions indicated on the wallpaper packaging. Usually the instructions are universal: if the wallpaper has a paper base, then the glue is applied to both the wallpaper and the walls; if the material has a non-woven base, then the glue is applied only to the walls. Try to apply the solution evenly so that there are no dry areas left (use a roller or wide brushes for this). To ensure that the wallpaper sheet lies flat on the wall, smooth it using a spatula or a wide rubber roller. Move from top to bottom, then to the edges.
3. Using a construction knife, cut off the excess pieces from the bottom and cut holes for the sockets. It is best to cover walls with vinyl wallpaper together. First, the sheet is applied to the upper edge of the wall, then aligned vertically and pressed.
4. Avoid temperature changes and sheet stretching. If the canvas is stretched too much when gluing, then later it will dry out and return to its previous shape, and this can lead to distortion and defects.

How to make a screen yourself

Many people who love to craft do not want to buy standard ready-made models, so they make bath screens with their own hands. Taking into account the wishes and capabilities of the owners, different materials are used for this, which will determine the order of work.

Area measurements

The length of a standard bathtub is 150, 170, 180 cm, its height is 65 cm. In accordance with the model of the bowl for which the screen is made, its area is calculated: the width is multiplied by the height.

An important step is determining the fastening locations.

If the partition will be mounted at an angle, then it must be kept parallel to the sides of the bathtub.

Calculations and drawings

At the preparatory stage, the junction of the screen and the wall is determined, a vertical line is drawn on it, this is done using a level. The countdown starts from the top edge of the bath.

The second line is drawn parallel to the bowl. Its thickness should correspond to the thickness of the frame blanks. Marks are made from the line drawn on the wall and along the length of the segment marked on the floor.

If you plan to finish the panel with ceramic tiles, then you need to apply markings, taking into account the fact that this material will take up 2.5 cm in thickness.

Screen drawing.

Features of creating an apron for baths with complex shapes

Now many people, instead of a standard rectangular bathtub, choose semicircular or any other shaped bowls.

The technology for creating a screen from tiles is almost the same, but there are some nuances:

1. The profile should be shaped like the surface of the font. To do this, cuts are made on the metal strips from which the frame is made, and then the profile is given the desired shape. Create 2 identical arcs, fix them at the top and bottom parallel to each other. To improve the rigidity of the structure, several vertical jumpers are installed.
2. To give the required shape to the drywall, it is first slightly moistened and then smoothly bent.
3. To fix the tiles, elastic glue is used, the distance between the individual elements is leveled with crosses.

Bath apron of unusual configuration..

Sliding screen made of plastic sheets

To implement the idea of ​​​​creating a sliding structure, they choose MDF, plasterboard, but most often it is made of plastic.

The work is performed in this order:

1. Marking and assembling a metal frame.
2. Aluminum guides are fixed from below and above along the entire length.
3. Doors of the required size are cut out of a sheet of plastic and inserted into the guides. If you want to make two movable sashes, then their dimensions should be such that when closed they overlap each other. There is an option when only one part is opened, each owner makes his own choice.
4. Mount the handles and check the functionality of the system.

If the room is small, then the screen can be made of mirror panels; this solution helps to visually expand the space.

Sliding plastic screen.

Advantages of plastic panels

Now let’s look at the main advantages plastic panels for walls in the kitchen give us:

PVC sheets for kitchen decoration

• quick installation and dismantling without the participation of wet processes, this saves time and money spent on repairs;
• assembly requires a minimum of tools, and additional finishing work such as painting, varnishing and regular maintenance is not required;
• noise and heat insulation;
• a good option for kitchens where there is a humid environment;
• simple and easy maintenance, it is possible to wash the walls and ceiling using various materials and cleaning products;
• long service life;
• wide range of colors of this facing material;
• it is possible to dismantle the installed panels if it is necessary to repair the communications underneath them, or to move them to another location;
• There is a full range of decorative accessories and finishing profiles for PVC cladding.

Highly decorative and durable plastic finishing materials for walls

Kitchen wall panels made of plastic are resistant to water, temperature changes and chemical cleaning agents. This makes them an excellent option for finishing kitchen interiors. In addition, the quality and appearance of this finish does not deteriorate over time due to frequent washing with the addition of cleaning agents.

Note! The materials from which plastic kitchen panels are made are safe and classified as a non-flammable product. The serious advantages of this finishing material are long service life, stability, flexibility and low maintenance costs.

Kitchen design made from plastic panels is an excellent aesthetic solution for organizing a modern and practical interior.

It incorporates the best qualities of PVC material, such as:

• ease;
• resistance to adverse effects;
• decorativeness;
• large selection of different options and colors.

Types of PVC cladding

Variety of PVC wall panels

The wall panel for the kitchen made of plastic is offered in various options in a wide range of colors. The standard length is 2.6 meters, the width varies from 10.5 – 25 – 37.5 centimeters and the thickness varies from 8 to 10 millimeters.

A plastic panel for the kitchen with a variety of textures and various color nuances gives complete freedom of imagination when creating design and finding new areas of application.

1. Decorative finishing material with a width of 105 millimeters is offered in various color collections:

• wood decor: pine, birch, oak;
• white;
• brown;
• under red brick;
• graphite.

Plastic panels in the kitchen are characterized by long service life, resistance to moisture, easy to clean and quick installation. Special profiles and accessories allow you to completely hide all joints and unsightly elements and get an attractive, finished appearance.

PVC cladding with a width of 105 millimeters is highly resistant to mechanical damage and adverse influences.

1. A plastic wall panel for the kitchen with a width of 250 millimeters allows you to choose the color and style for different rooms. This is one of the modern and economical options for wall decoration with a wide range of applications.

Additional profiles and mounting accessories

With the help of additional and universal profiles, you can easily line the walls and ceiling with your own hands. Panels of this width are available in a wide range of colors in several collections, including finishes that imitate marble or wood.

This type of panels is also characterized by durability, resistance to moisture and temperature, and is easy to maintain. Installation is simple and fast.

1. DUMA-CLIP is a revolutionary system for cladding walls and ceilings. These are the first PVC panels of their kind with a four-way joint in length and width.

Features and advantages of this system:

• since DUMA-CLIP panels are only twenty meters long and 25 centimeters wide and are easy to transport;
• the small size also simplifies and speeds up installation;
• thanks to the new fastening system, characterized by the fact that the panels can be connected to each other on all sides, they can cover the ceiling and walls of any length, as well as large spaces without much effort;
• profitability, as a minimum amount of waste is generated;
• with the unique DUMA-CLIP system, the cladding can be assembled along its length, without the need for an additional connecting profile, which reduces waste to a minimum;
• This material is moisture resistant, easy to maintain and fireproof.

New plastic cladding system DUMA-CLIP

Note! Once installed, kitchen wall panels are durable and resistant, requiring only periodic cleaning with normal detergents. It is recommended to avoid the use of abrasive and aggressive products containing chlorine.

The plastic wall panel for the kitchen will serve you for many years, while its original color will be preserved. Compared to wood or materials made from it, PVC cladding does not bend, crack or swell from moisture. Many manufacturers guarantee their products for up to five years.

Installation and accessories for assembling plastic panels

PVC cladding, in addition to its main function - decorative finishing of kitchen walls and ceilings, allows you to create decorative partitions, hide electrical wiring and pipes, cover uneven surfaces, as well as solve other spatial and structural issues.

High-quality panels of the correct geometric shape are convenient for both professional and self-installation.

Installation and components for assembly

The following components and accessories are provided for the installation of plastic sheets:

• Ordinary finishing profile. It is attached to the beginning of the wall or ceiling. The first panel is installed in the groove of this profile.
• Right angle is used to attach panels to internal and external corners. It is installed before attaching decorative trim.
• A profile with a variable angle of inclination is used to attach panels to sharp or obtuse corners. It is also installed before attaching the main finishing material.
• Decorative profiles are installed after installation is completed. They give a finished look to the areas located between the wall and the ceiling.
• Connecting elements simplify the connection of horizontal and vertical panels to each other.
• The bottom panel gives a finished look between the wall and the floor. Allows you to hide electrical wiring.

Mounting options

Installation of decorative PVC sheets in the kitchen

The following step-by-step instructions will help you choose the most suitable installation option.

1. For uneven surfaces, the plastic cladding must be fixed to a wooden or metal frame. It is installed perpendicular to the method of fastening the panels. The distance between the frame crossbars should be no more than fifty centimeters. In this case, a space is formed between the wall and the finishing material, which can be thermally insulated. No special preparation of the base is required. Therefore, this type of cladding is clean, simple and does not require special labor and financial costs. The plastic sheets can be secured using nails, staples or a new mounting profile. First, the slats are attached to the base, then the remaining slats are attached parallel to it, 30 to 50 centimeters apart. The next step is to install and attach the corner profile to the slats. Then the panels are inserted into the corner and secured with staples. Each subsequent plank is attached in a similar way.

Installation of panels on a wooden profile

1. Direct mounting directly to the wall or ceiling. It is carried out using fasteners and is possible if there are smooth, even and dry surfaces. Nails, staples or screws are used for fastening. It is more advisable to start installation from the corner in which the final corner or profile is previously installed. If you cover the entire wall to the ceiling with panels, then a ceiling profile is also attached. It is better to start installation from the bottom. The first plastic sheet is placed and secured with nails or staples. Then the second sheet is installed tightly to the first and so on.
2. Another way to install panels is to fasten them using adhesives or mixtures. This option saves free space and is optimal for small spaces.

You must choose the installation method based on the existing conditions directly in your kitchen. To do this, it is important to know the material from which the walls are built, how smooth their surface is, etc.

The video in this article will clearly show how you can carry out cladding work with decorative plastic panels.

Design ideas and decor

Purchasing moisture-resistant wall panels is an option that allows you to create a more attractive finish in the bathroom, compared to conventional tiles. The combination of elements of different size, color or texture will allow you to decorate the room in an exclusive style, the main thing is to use panels of the same thickness and made by the same manufacturer.

An unusual pattern is quite simply formed when installing products at a certain angle from the floor - products can converge at one point and diverge in different directions. You can decorate a ceiling of any complexity with panels, it all depends on your imagination.

Products with a frieze do not require the creation of complex shapes, since they are remarkable due to their decor. In addition, they can imitate the texture of wood or stone. The panels are manufactured in glossy and matte finishes. To visually increase the area of ​​a room or to visually raise the ceiling, you can use products with a reflective surface or arrange elements with mirror inserts.

Panels can be plain or colored. The use of offset printing makes it possible to create original compositions. The use of frieze greatly expands the product range, since panels can have a variety of textures, colors and shades.

Room design

You need to think carefully about the idea of ​​your future design, based on your personal wishes and the size of the kitchen. Designs with large ornaments and dark shades should be used when the kitchen is large enough. If the kitchen is small, it would be optimal to choose a lighter material or an abstraction in the form of a small pattern.

To bring original design ideas to life, wall decoration with PVC tiles with an original texture is perfect. For example, for a classic type of finish you need to take wood-look tiles, and if you like the high-tech style, then imitation metal will highlight it well. For a minimalist style, brick-like tiles are suitable.